lkml.org 
[lkml]   [2016]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/5] Qualcomm PCIe driver and designware fixes
On Fri, Dec 18, 2015 at 02:38:54PM +0200, Stanimir Varbanov wrote:
> Hi,
>
> I'm sending v5 with following changes:
> - in 1/5 - replace wmb() call with PCIE_ATU_CR2 register read.
> - in 3/5 - addressed comments from Born Helgaas about usage of a
> standard PCI capabilities register names and rename link training
> function to the way that other Designware based drivers use.
> - in 5/5 - addressed a comment from Bjorn Andersson about regulator
> label duplication.
>
> Comments are welcome!
>
> The previous v4 of the patch set can be found at [1].
>
> regards,
> Stan
>
> [1] https://lkml.org/lkml/2015/12/3/370
>
> Stanimir Varbanov (5):
> PCI: designware: ensure ATU is enabled before IO/conf space accesses
> DT: PCI: qcom: Document PCIe devicetree bindings
> PCI: qcom: Add Qualcomm PCIe controller driver
> ARM: dts: apq8064: add pcie devicetree node
> ARM: dts: ifc6410: enable pcie dt node for this board
>
> .../devicetree/bindings/pci/qcom,pcie.txt | 233 ++++++++
> MAINTAINERS | 7 +
> arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 26 +
> arch/arm/boot/dts/qcom-apq8064.dtsi | 36 ++
> drivers/pci/host/Kconfig | 10 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-designware.c | 7 +
> drivers/pci/host/pcie-qcom.c | 617 ++++++++++++++++++++
> 8 files changed, 937 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
> create mode 100644 drivers/pci/host/pcie-qcom.c

Applied to pci/host-qcom for v4.5, with Pratyush's ack on the first patch.
Thanks!


\
 
 \ /
  Last update: 2016-01-05 23:21    [W:0.542 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site