lkml.org 
[lkml]   [2016]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 4/4] serial: 8250_pci: Remove Fintek F81504/508/512 UART driver
From
Date
Hi Andy,

Andy Shevchenko 於 2016/1/29 下午 08:40 寫道:
> On Fri, 2016-01-29 at 16:20 +0800, Peter Hung wrote:
>> Hi Andy,
>>
>> Andy Shevchenko 於 2016/1/28 下午 08:04 寫道:
>>> On Thu, 2016-01-28 at 17:20 +0800, Peter Hung wrote:
>>>> - /* Fintek PCI serial cards */
>>>> - { PCI_DEVICE(0x1c29, 0x1104), .driver_data =
>>>> pbn_fintek_4 },
>>>> - { PCI_DEVICE(0x1c29, 0x1108), .driver_data =
>>>> pbn_fintek_8 },
>>>> - { PCI_DEVICE(0x1c29, 0x1112), .driver_data =
>>>> pbn_fintek_12
>>>> },
>>>
>>> Shouldn't you blacklist them in 8250_pci?
>>>
>>
>> You are referring to add blacklist instead of remove F81504/508/512
>> code?
>
> No.
>
>> or add blacklist and remove code?
>
> This one.

ok

> Check what lspci tells you about your device. I'm pretty sure that it
> has Serial Class, which would trigger enumeration in 8250_pci.c if it
> comes first.
>

I had add log with 8250_pci.c. It really trigger once by 8250_pci.c,
but will failed with serial_pci_guess_board(). So It can be handled by
f81504-core.c. I should add pid/vid to blacklist and comments it'll
be handled by f81504-core.c

Thanks
--
With Best Regards,
Peter Hung

\
 
 \ /
  Last update: 2016-02-01 05:01    [W:0.072 / U:1.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site