| Date | Sun, 03 Jan 2016 16:05:02 +1100 | From | Finn Thain <> | Subject | [PATCH v4 01/78] atari_scsi: Fix SCSI host ID setting |
| |
The NVRAM location of this byte is 16, as documented in http://toshyp.atari.org/en/004009.html
This was confirmed by Michael Schmitz, by setting the SCSI host ID under EmuTOS and then checking the value in /proc/driver/nvram and /dev/nvram under Linux.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com>
--- drivers/scsi/atari_scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux/drivers/scsi/atari_scsi.c =================================================================== --- linux.orig/drivers/scsi/atari_scsi.c 2016-01-03 16:02:39.000000000 +1100 +++ linux/drivers/scsi/atari_scsi.c 2016-01-03 16:02:40.000000000 +1100 @@ -880,7 +880,7 @@ static int __init atari_scsi_probe(struc } else { /* Test if a host id is set in the NVRam */ if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) { - unsigned char b = nvram_read_byte(14); + unsigned char b = nvram_read_byte(16); /* Arbitration enabled? (for TOS) * If yes, use configured host ID
|