lkml.org 
[lkml]   [2016]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] USB: mxu11x0: clean device control commands
On Sun, Jan 03, 2016 at 03:26:00PM +0100, Mathieu OTHACEHE wrote:
> Sending OPEN and START commands twice is not necessary for this driver.
> Also send STOP command at close.
>
> Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com>
> ---
> drivers/usb/serial/mxu11x0.c | 31 +++++++------------------------
> 1 file changed, 7 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/usb/serial/mxu11x0.c b/drivers/usb/serial/mxu11x0.c
> index 0fe7eab..354fcb5 100644
> --- a/drivers/usb/serial/mxu11x0.c
> +++ b/drivers/usb/serial/mxu11x0.c
> @@ -823,30 +823,6 @@ static int mxu1_open(struct tty_struct *tty, struct usb_serial_port *port)
> goto unlink_int_urb;
> }
>
> - /*
> - * reset the data toggle on the bulk endpoints to work around bug in
> - * host controllers where things get out of sync some times
> - */
> - usb_clear_halt(serial->dev, port->write_urb->pipe);
> - usb_clear_halt(serial->dev, port->read_urb->pipe);

This is an unrelated change. You can remove it, but then do so in a
separate patch.

> -
> - if (tty)
> - mxu1_set_termios(tty, port, NULL);

But you should definitely not be removing this.

> -
> - status = mxu1_send_ctrl_urb(serial, MXU1_OPEN_PORT,
> - open_settings, MXU1_UART1_PORT);
> - if (status) {
> - dev_err(&port->dev, "cannot send open command: %d\n", status);
> - goto unlink_int_urb;
> - }
> -
> - status = mxu1_send_ctrl_urb(serial, MXU1_START_PORT,
> - 0, MXU1_UART1_PORT);
> - if (status) {
> - dev_err(&port->dev, "cannot send start command: %d\n", status);
> - goto unlink_int_urb;
> - }
> -

Also did you not say that your sniffed traffic showed the following
sequence OPEN, CONFIG (e.g. purge, set_termios), START?

Johan


\
 
 \ /
  Last update: 2016-01-03 18:21    [W:0.036 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site