lkml.org 
[lkml]   [2016]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V2 1/1] gpio-f7188x: Add F81866 GPIO supports
From
On Fri, Jan 22, 2016 at 8:23 AM, Peter Hung <hpeter@gmail.com> wrote:

> Add F81866 GPIO supports
>
> Fintek F81866 is a SuperIO. It contains HWMON/GPIO/Serial Ports.
> and it has totally 72(9x8 sets) gpio pins.
>
> Here is the PDF spec:
> http://www.alldatasheet.com/datasheet-pdf/pdf/459085/FINTEK/F81866AD-I.html
>
> The control method is the same with F7188x, but we should care the address
> of GPIO8x.
>
> GPIO address is below:
> GPIO0x based: 0xf0
> GPIO1x based: 0xe0
> GPIO2x based: 0xd0
> GPIO3x based: 0xc0
> GPIO4x based: 0xb0
> GPIO5x based: 0xa0
> GPIO6x based: 0x90
> GPIO7x based: 0x80
> GPIO8x based: 0x88 <-- not 0x70.
>
> Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>

This v2 patch applied with Simon's ACK.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2016-01-28 10:21    [W:0.024 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site