Messages in this thread Patch in this message | | | From | Nicolas Ferre <> | Subject | [PATCH 2/2] ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type | Date | Wed, 27 Jan 2016 11:06:49 +0100 |
| |
For phy0 KSZ8081, the type of GPIO IRQ should be "level low" instead of "edge falling".
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Cc: <stable@vger.kernel.org> # 4.1+ --- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 8cf9999cb0cd..569026e8f96c 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -91,7 +91,7 @@ phy0: ethernet-phy@1 { interrupt-parent = <&pioE>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; reg = <1>; }; }; -- 2.1.3
| |