lkml.org 
[lkml]   [2016]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 12/22] arm64: avoid dynamic relocations in early boot code
Date
Before implementing KASLR for arm64 by building a self-relocating PIE
executable, we have to ensure that values we use before the relocation
routine is executed are not subject to dynamic relocation themselves.
This applies not only to virtual addresses, but also to values that are
supplied by the linker at build time and relocated using R_AARCH64_ABS64
relocations.

So instead, use assemble time constants, or force the use of static
relocations by folding the constants into the instructions.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/kernel/efi-entry.S | 2 +-
arch/arm64/kernel/head.S | 39 +++++++++++++-------
2 files changed, 27 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S
index a773db92908b..f82036e02485 100644
--- a/arch/arm64/kernel/efi-entry.S
+++ b/arch/arm64/kernel/efi-entry.S
@@ -61,7 +61,7 @@ ENTRY(entry)
*/
mov x20, x0 // DTB address
ldr x0, [sp, #16] // relocated _text address
- ldr x21, =stext_offset
+ movz x21, #:abs_g0:stext_offset
add x21, x0, x21

/*
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 2a39d4ab02bf..ab4c8e93e31c 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -67,12 +67,11 @@
* in the entry routines.
*/
__HEAD
-
+_head:
/*
* DO NOT MODIFY. Image header expected by Linux boot-loaders.
*/
#ifdef CONFIG_EFI
-efi_head:
/*
* This add instruction has no meaningful effect except that
* its opcode forms the magic "MZ" signature required by UEFI.
@@ -94,14 +93,14 @@ efi_head:
.byte 0x4d
.byte 0x64
#ifdef CONFIG_EFI
- .long pe_header - efi_head // Offset to the PE header.
+ .long pe_header - _head // Offset to the PE header.
#else
.word 0 // reserved
#endif

#ifdef CONFIG_EFI
.globl __efistub_stext_offset
- .set __efistub_stext_offset, stext - efi_head
+ .set __efistub_stext_offset, stext - _head
.align 3
pe_header:
.ascii "PE"
@@ -124,7 +123,7 @@ optional_header:
.long _end - stext // SizeOfCode
.long 0 // SizeOfInitializedData
.long 0 // SizeOfUninitializedData
- .long __efistub_entry - efi_head // AddressOfEntryPoint
+ .long __efistub_entry - _head // AddressOfEntryPoint
.long __efistub_stext_offset // BaseOfCode

extra_header_fields:
@@ -139,7 +138,7 @@ extra_header_fields:
.short 0 // MinorSubsystemVersion
.long 0 // Win32VersionValue

- .long _end - efi_head // SizeOfImage
+ .long _end - _head // SizeOfImage

// Everything before the kernel image is considered part of the header
.long __efistub_stext_offset // SizeOfHeaders
@@ -219,11 +218,13 @@ ENTRY(stext)
* On return, the CPU will be ready for the MMU to be turned on and
* the TCR will have been set.
*/
- ldr x27, =__mmap_switched // address to jump to after
+ ldr x27, 0f // address to jump to after
// MMU has been enabled
adr_l lr, __enable_mmu // return (PIC) address
b __cpu_setup // initialise processor
ENDPROC(stext)
+ .align 3
+0: .quad __mmap_switched - (_head - TEXT_OFFSET) + KIMAGE_VADDR

/*
* Preserve the arguments passed by the bootloader in x0 .. x3
@@ -391,7 +392,8 @@ __create_page_tables:
mov x0, x26 // swapper_pg_dir
ldr x5, =KIMAGE_VADDR
create_pgd_entry x0, x5, x3, x6
- ldr x6, =KERNEL_END // __va(KERNEL_END)
+ ldr w6, kernel_img_size
+ add x6, x6, x5
mov x3, x24 // phys offset
create_block_map x0, x7, x3, x5, x6

@@ -408,6 +410,9 @@ __create_page_tables:
mov lr, x27
ret
ENDPROC(__create_page_tables)
+
+kernel_img_size:
+ .long _end - (_head - TEXT_OFFSET)
.ltorg

/*
@@ -415,6 +420,10 @@ ENDPROC(__create_page_tables)
*/
.set initial_sp, init_thread_union + THREAD_START_SP
__mmap_switched:
+ adr_l x8, vectors // load VBAR_EL1 with virtual
+ msr vbar_el1, x8 // vector table address
+ isb
+
// Clear BSS
adr_l x0, __bss_start
mov x1, xzr
@@ -601,13 +610,19 @@ ENTRY(secondary_startup)
adrp x26, swapper_pg_dir
bl __cpu_setup // initialise processor

- ldr x21, =secondary_data
- ldr x27, =__secondary_switched // address to jump to after enabling the MMU
+ ldr x8, =KIMAGE_VADDR
+ ldr w9, 0f
+ sub x27, x8, w9, sxtw // address to jump to after enabling the MMU
b __enable_mmu
ENDPROC(secondary_startup)
+0: .long (_text - TEXT_OFFSET) - __secondary_switched

ENTRY(__secondary_switched)
- ldr x0, [x21] // get secondary_data.stack
+ adr_l x5, vectors
+ msr vbar_el1, x5
+ isb
+
+ ldr_l x0, secondary_data // get secondary_data.stack
mov sp, x0
and x0, x0, #~(THREAD_SIZE - 1)
msr sp_el0, x0 // save thread_info
@@ -632,8 +647,6 @@ __enable_mmu:
ubfx x2, x1, #ID_AA64MMFR0_TGRAN_SHIFT, 4
cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED
b.ne __no_granule_support
- ldr x5, =vectors
- msr vbar_el1, x5
msr ttbr0_el1, x25 // load TTBR0
msr ttbr1_el1, x26 // load TTBR1
isb
--
2.5.0
\
 
 \ /
  Last update: 2016-01-26 18:21    [W:0.146 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site