lkml.org 
[lkml]   [2016]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 1/6] clk: hisilicon: add CRG driver for hi3519 soc
From
Date
Hi Paul Bolle,
Thank you for your reply.

On 2016/1/26 9:17, Paul Bolle wrote:
> On ma, 2016-01-25 at 11:01 +0800, Jiancheng Xue wrote:
>> --- a/drivers/clk/hisilicon/Kconfig
>> +++ b/drivers/clk/hisilicon/Kconfig
>
>> +config COMMON_CLK_HI3519
>> + bool "Hi3519 Clock Driver"
>> + depends on ARCH_HISI
>> + default y
>> + help
>> + Build the clock driver for hi3519.
>
>> --- a/drivers/clk/hisilicon/Makefile
>> +++ b/drivers/clk/hisilicon/Makefile
>
>> +obj-$(CONFIG_COMMON_CLK_HI3519) += clk-hi3519.o
>
> If I parsed the above correctly clk-hi3519.o can only be built-in,
> right?
>
Yes. You are right.

But this clock driver should be able to be compiled as a module.
Even though it is preferred to be built-in.

I'll fix it in next version. Thank you.

Regards,

Jiancheng

>> --- /dev/null
>> +++ b/drivers/clk/hisilicon/clk-hi3519.c
>
>> +#include <linux/module.h>
>
> So is this include actually needed?
>
>> +static int hi3519_clk_probe(struct platform_device *pdev)
>> +{
>> + struct device_node *np = pdev->dev.of_node;
>> + struct hisi_clock_data *clk_data;
>> +
>> + clk_data = hisi_clk_init(np, HI3519_NR_CLKS);
>> + if (!clk_data)
>> + return -ENODEV;
>> +
>> + hisi_clk_register_fixed_rate(hi3519_fixed_rate_clks,
>> +
>> ARRAY_SIZE(hi3519_fixed_rate_clks),
>> + clk_data);
>> + hisi_clk_register_mux(hi3519_mux_clks,
>> ARRAY_SIZE(hi3519_mux_clks),
>> + clk_data);
>> + hisi_clk_register_gate(hi3519_gate_clks,
>> + ARRAY_SIZE(hi3519_gate_clks), clk_data);
>> +
>> + return hisi_reset_init(np);
>> +}
>
> (evolution 3.16.5 makes replying to code quite a challenge.)
>
>> +static const struct of_device_id hi3519_clk_match_table[] = {
>> + { .compatible = "hisilicon,hi3519-crg" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, hi3519_clk_match_table);
>
> Last time I checked MODULE_DEVICE_TABLE is preprocessed away for built
> -in code.
>
>> +static void __exit hi3519_clk_exit(void)
>> +{
>> + platform_driver_unregister(&hi3519_clk_driver);
>> +}
>> +module_exit(hi3519_clk_exit);
>
> Not needed for built-in only code.
>
>> +MODULE_DESCRIPTION("HiSilicon Hi3519 Clock Driver");
>
> Ditto.
>
>> --- a/drivers/clk/hisilicon/clk.c
>> +++ b/drivers/clk/hisilicon/clk.c
>
>> +EXPORT_SYMBOL(hisi_clk_init);
>
> What module uses this export?
>
>> +EXPORT_SYMBOL(hisi_clk_register_fixed_rate);
>
> Ditto.
>
>> +EXPORT_SYMBOL(hisi_clk_register_fixed_factor);
>
> Ditto.
>
>> +EXPORT_SYMBOL(hisi_clk_register_mux);
>
> Ditto.
>
>> +EXPORT_SYMBOL(hisi_clk_register_divider);
>
> Ditto.
>
>> +EXPORT_SYMBOL(hisi_clk_register_gate);
>
> Ditto.
>
>> +EXPORT_SYMBOL(hisi_clk_register_gate_sep);
>
> Ditto.
>
>> --- /dev/null
>> +++ b/drivers/clk/hisilicon/reset.c
>
>> +int hisi_reset_init(struct device_node *np)
>> +{
>> + [...]
>> +}
>> +EXPORT_SYMBOL(hisi_reset_init);
>
> Ditto.
>
>> --- /dev/null
>> +++ b/drivers/clk/hisilicon/reset.h
>
>> +#ifdef CONFIG_RESET_CONTROLLER
>> +int hisi_reset_init(struct device_node *np);
>> +#else
>> +static inline int hisi_reset_init(struct device_node *np)
>> +{
>> + return 0;
>> +}
>> +#endif
>
> Thanks,
>
>
> Paul Bolle
>
> .
>

\
 
 \ /
  Last update: 2016-01-27 04:41    [W:0.106 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site