lkml.org 
[lkml]   [2016]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 00/10] [media] tvp5150: add MC and DT support
From
Date
On 01/07/2016 01:46 PM, Javier Martinez Canillas wrote:

FYI: this patch series no longer applies after the merge of 4.5-rc1.

So besides fixing Mauro's comment for 3/10 you need to respin this series
anyway.

Regards,

Hans

> Hello,
>
> One of my testing platforms for the MC next gen [0] work has been an OMAP3
> board (IGEPv2) with a tvp5151 video decoder attached to the OMAP3ISP block.
>
> I've been using some patches from Laurent Pinchart that adds MC support to
> the tvp5150 driver. The patches were never posted to the list and it seems
> he doesn't have time to continue working on this so I have taken them from
> his personal tree [1] and submitting now for review.
>
> The series also contains patches that adds DT support to the driver so it
> can be used in DT based platforms.
>
> This is the second version of the series that fixes issues addressed by
> Rob Herring and Laurent Pinchart. The first patch-set version was [2].
>
> To test, the following media pipeline was used:
>
> $ media-ctl -r -l '"tvp5150 1-005c":0->"OMAP3 ISP CCDC":0[1], "OMAP3 ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]'
> $ media-ctl -v --set-format '"OMAP3 ISP CCDC":0 [UYVY2X8 720x240 field:alternate]'
> $ media-ctl -v --set-format '"OMAP3 ISP CCDC":1 [UYVY2X8 720x240 field:interlaced-tb]'
>
> And frames captured with the yavta tool:
>
> $ yavta -f UYVY -s 720x480 -n 1 --field interlaced-tb --capture=1 -F /dev/video2
> $ raw2rgbpnm -f UYVY -s 720x480 frame-000000.bin frame-000000.pnm
>
> The patches are on top of [0] not because is a depedency but just to avoid
> merge conflicts and I don't expect them to be picked before that anyways.
>
> Best regards,
> Javier
>
> [0]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-August/367109.html
> [1]: http://git.linuxtv.org/pinchartl/media.git/log/?h=omap3isp/tvp5151
> [2]: https://lkml.org/lkml/2016/1/4/216
>
> Changes in v2:
> - Fix indentation of the DTS example. Suggested by Rob Herring.
> - Rename powerdown-gpios to pdn-gpios to match the pin name in
> the datasheet. Suggested by Laurent Pinchart.
> - Add optional properties for the video endpoint and list the supported
> values. Suggested by Laurent Pinchart.
> - Add Reviewed-by tag from Laurent Pinchart to patch 8/10.
> - Include missing linux/gpio/consumer.h header. Reported by kbuild test robot.
> - Keep the headers sorted alphabetically. Suggested by Laurent Pinchart.
> - Rename powerdown to pdn to match datasheet pin. Suggested by Laurent Pinchart.
> - Embed mbus_type into struct tvp5150. Suggested by Laurent Pinchart.
> - Remove platform data support. Suggested by Laurent Pinchart.
> - Check if the hsync, vsync and field even active properties are correct.
> Suggested by Laurent Pinchart.
>
> Eduard Gavin (1):
> [media] tvp5150: Add OF match table
>
> Javier Martinez Canillas (3):
> [media] tvp5150: Add device tree binding document
> [media] tvp5150: Initialize the chip on probe
> [media] tvp5150: Configure data interface via DT
>
> Laurent Pinchart (6):
> [media] tvp5150: Restructure version detection
> [media] tvp5150: Add tvp5151 support
> [media] tvp5150: Add pad-level subdev operations
> [media] tvp5150: Add pixel rate control support
> [media] tvp5150: Add s_stream subdev operation support
> [media] tvp5150: Add g_mbus_config subdev operation support
>
> .../devicetree/bindings/media/i2c/tvp5150.txt | 45 ++++
> drivers/media/i2c/tvp5150.c | 269 +++++++++++++++++----
> 2 files changed, 268 insertions(+), 46 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp5150.txt
>

\
 
 \ /
  Last update: 2016-01-25 16:41    [W:0.080 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site