lkml.org 
[lkml]   [2016]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5] acpi, apei: add Boot Error Record Table (BERT) support
On Tue, Jan 19, 2016 at 05:34:02PM +0800, fu.wei@linaro.org wrote:
> From: Huang Ying <ying.huang@intel.com>
>
> ACPI/APEI is designed to verifiy/report H/W errors, like Corrected
> Error(CE) and Uncorrected Error(UC). It contains four tables: HEST,
> ERST, EINJ and BERT. The first three tables have been merged for
> a long time, but because of lacking BIOS support for BERT, the
> support for BERT is pending until now. Recently on ARM 64 platform
> it is has been supported. So here we come.
>
> Under normal circumstances, when a hardware error occurs, kernel will
> be notified via NMI, MCE or some other method, then kernel will
> process the error condition, report it, and recover it if possible.
> But sometime, the situation is so bad, so that firmware may choose to
> reset directly without notifying Linux kernel.
>
> Linux kernel can use the Boot Error Record Table (BERT) to get the
> un-notified hardware errors that occurred in a previous boot. In this
> patch, the error information is reported via printk.
>
> For more information about BERT, please refer to ACPI Specification
> version 6.0, section 18.3.1:
> http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
>
> The following log is a BERT record after system reboot because of hitting
> a fatal memory error:
> BERT: Error records from previous boot:
> [Hardware Error]: It has been corrected by h/w and requires no further action
> [Hardware Error]: event severity: corrected
> [Hardware Error]: Error 0, type: recoverable
> [Hardware Error]: section_type: memory error
> [Hardware Error]: error_status: 0x0000000000000400
> [Hardware Error]: physical_address: 0xffffffffffffffff
> [Hardware Error]: card: 1 module: 2 bank: 3 row: 1 column: 2 bit_position: 5
> [Hardware Error]: error_type: 2, single-bit ECC
>
> [Tomasz Nowicki: Clear error status at the end of error handling]
> [Tony: Applied some cleanups suggested by Fu Wei]
> [Fu Wei: delete EXPORT_SYMBOL_GPL(bert_disable), improve the code]
>
> Signed-off-by: Huang Ying <ying.huang@intel.com>
> Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
> Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
> Tested-by: Jonathan (Zhixiong) Zhang <zjzhang@codeaurora.org>
> Signed-off-by: Tony Luck <tony.luck@intel.com>
> Signed-off-by: Fu Wei <fu.wei@linaro.org>
> Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
> ---
> Changelog:
> v5: Drop some superfluous comments.
> Use the introduce of BERT in ACPI Specification instead of original one
> at the head of bert.c.
> Fix typo in apei-internal.h
> Simplify the introduce of bert_disable.
>
> v4: https://lkml.org/lkml/2016/1/8/382
> Fix the "#undef" bug
> Improve the instruction of "bert_disable",
> Delete the useless declaration in include/acpi/apei.h.
>
> v3: https://lkml.org/lkml/2016/1/7/214
> Merge the two patches
> Do some improvements according to Borislav's suggestion.
>
> v2: https://lkml.org/lkml/2015/8/18/336
> Delete EXPORT_SYMBOL_GPL(bert_disable), because "bert_disable" is only
> used in bert.c for now.
> Do some code-style cleanups.
>
> v1: The first upstream version submitted in linux-acpi mailing list:
> http://www.spinics.net/lists/linux-acpi/msg57384.html
>
> Documentation/kernel-parameters.txt | 3 +
> drivers/acpi/apei/Makefile | 2 +-
> drivers/acpi/apei/apei-internal.h | 2 +-
> drivers/acpi/apei/bert.c | 150 ++++++++++++++++++++++++++++++++++++
> 4 files changed, 155 insertions(+), 2 deletions(-)

Reviewed-by: Borislav Petkov <bp@suse.de>

--
Regards/Gruss,
Boris.

ECO tip #101: Trim your mails when you reply.

\
 
 \ /
  Last update: 2016-01-19 11:41    [W:0.122 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site