lkml.org 
[lkml]   [2016]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] drm/panel: simple: Add support for Sharp LQ101K1LY04
From
Date
Hi Joshua,

Am Dienstag, den 12.01.2016, 08:05 -0800 schrieb Joshua Clayton:
> Sharp LQ101K1LY04 is a 10 inch WXGA (1280x800) lvds panel
>

> ---
>  drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++

Missing documentation for the DT binding.

>  1 file changed, 26 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> index f97b73e..9207b5d 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -708,6 +708,29 @@ static const struct panel_desc
> giantplus_gpg482739qs5 = {
>   .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
>  };
>  
> +static const struct display_timing sharp_lq101k1ly04_timing = {
> + .pixelclock = { 60000000, 65000000, 80000000 },
> + .hactive = { 1280, 1280, 1280 },
> + .hfront_porch = { 20, 20, 20 },
> + .hback_porch = { 20, 20, 20 },
> + .hsync_len = { 10, 10, 10 },
> + .vactive = { 800, 800, 800 },
> + .vfront_porch = { 4, 4, 4 },
> + .vback_porch = { 4, 4, 4 },
> + .vsync_len = { 4, 4, 4 },
> + .flags = DISPLAY_FLAGS_PIXDATA_POSEDGE,
> +};
> +static const struct panel_desc sharp_lq101k1ly04 = {
> + .timings = &sharp_lq101k1ly04_timing,
> + .num_timings = 1,
> + .bpc = 8,
> + .size = {
> + .width = 217,
> + .height = 136,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
> +};
> +
This hunk isn't added at the correct place. Please keep the
alphabetical sorting.

>  static const struct display_timing hannstar_hsd070pww1_timing = {
>   .pixelclock = { 64300000, 71100000, 82000000 },
>   .hactive = { 1280, 1280, 1280 },
> @@ -1146,6 +1169,9 @@ static const struct of_device_id
> platform_of_match[] = {
>   .compatible = "hannstar,hsd070pww1",
>   .data = &hannstar_hsd070pww1,
>   }, {
> + .compatible = "sharp,lq101k1ly04",
> + .data = &sharp_lq101k1ly04,
> + }, {

Wrong insertion place again.

>   .compatible = "hannstar,hsd100pxn1",
>   .data = &hannstar_hsd100pxn1,
>   }, {

\
 
 \ /
  Last update: 2016-01-12 20:21    [W:0.051 / U:1.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site