lkml.org 
[lkml]   [2016]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ASoC: fsl: imx-sgtl5000: make audmux optional for imx sound driver
Date
i.MX6UL does not have the audio multiplexer (AUDMUX) like e.g. i.MX6Q,
but apart from that can use the same audio driver. Make audmux
optional for the imx-sgtl5000 driver, so it can be used on i.MX6UL
too. Also i.MX6UL requires use of the SAI interface rather than SSI.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
sound/soc/fsl/imx-sgtl5000.c | 70 +++++++++++++++++++++++---------------------
1 file changed, 36 insertions(+), 34 deletions(-)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index b99e0b5..7cefb40 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -65,40 +65,42 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
int int_port, ext_port;
int ret;

- ret = of_property_read_u32(np, "mux-int-port", &int_port);
- if (ret) {
- dev_err(&pdev->dev, "mux-int-port missing or invalid\n");
- return ret;
- }
- ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
- if (ret) {
- dev_err(&pdev->dev, "mux-ext-port missing or invalid\n");
- return ret;
- }
-
- /*
- * The port numbering in the hardware manual starts at 1, while
- * the audmux API expects it starts at 0.
- */
- int_port--;
- ext_port--;
- ret = imx_audmux_v2_configure_port(int_port,
- IMX_AUDMUX_V2_PTCR_SYN |
- IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) |
- IMX_AUDMUX_V2_PTCR_TCSEL(ext_port) |
- IMX_AUDMUX_V2_PTCR_TFSDIR |
- IMX_AUDMUX_V2_PTCR_TCLKDIR,
- IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port));
- if (ret) {
- dev_err(&pdev->dev, "audmux internal port setup failed\n");
- return ret;
- }
- ret = imx_audmux_v2_configure_port(ext_port,
- IMX_AUDMUX_V2_PTCR_SYN,
- IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
- if (ret) {
- dev_err(&pdev->dev, "audmux external port setup failed\n");
- return ret;
+ if (!of_property_read_bool(np, "fsl,no-audmux")) {
+ ret = of_property_read_u32(np, "mux-int-port", &int_port);
+ if (ret) {
+ dev_err(&pdev->dev, "mux-int-port missing or invalid\n");
+ return ret;
+ }
+ ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
+ if (ret) {
+ dev_err(&pdev->dev, "mux-ext-port missing or invalid\n");
+ return ret;
+ }
+
+ /*
+ * The port numbering in the hardware manual starts at 1, while
+ * the audmux API expects it starts at 0.
+ */
+ int_port--;
+ ext_port--;
+ ret = imx_audmux_v2_configure_port(int_port,
+ IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(ext_port) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR,
+ IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port));
+ if (ret) {
+ dev_err(&pdev->dev, "audmux internal port setup failed\n");
+ return ret;
+ }
+ ret = imx_audmux_v2_configure_port(ext_port,
+ IMX_AUDMUX_V2_PTCR_SYN,
+ IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
+ if (ret) {
+ dev_err(&pdev->dev, "audmux external port setup failed\n");
+ return ret;
+ }
}

ssi_np = of_parse_phandle(pdev->dev.of_node, "ssi-controller", 0);
--
2.1.4
\
 
 \ /
  Last update: 2016-01-12 19:41    [W:0.050 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site