lkml.org 
[lkml]   [2016]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ASoC: mediatek: Enable 33bit memory address to support 4GB DRAM
From
Date
On Mon, 2016-01-11 at 17:02 +0800, Takashi Iwai wrote:
> On Mon, 11 Jan 2016 09:00:50 +0100,
> PC Liao wrote:
> >
> > @@ -603,7 +606,10 @@ static int mtk_afe_dais_hw_params(struct snd_pcm_substream *substream,
> > if (ret < 0)
> > return ret;
> >
> > - memif->phys_buf_addr = substream->runtime->dma_addr;
> > + if (sizeof(dma_addr_t) > 4)
> > + msb_at_bit33 = (substream->runtime->dma_addr & 0x100000000) ? 1 : 0;
>
> Better to put a proper suffix for the constant over 32bit.
>
> Or use upper_32_bits(). Then sizeof() check can be omitted, as the
> compiler should be smart enough to know it beforehand.
>
>
> Takashi


Hi Takashi,

Thanks for your comment.
I change as below:
@@ -606,10 +606,8 @@ static int mtk_afe_dais_hw_params(struct
snd_pcm_substream
if (ret < 0)
return ret;

- if (sizeof(dma_addr_t) > 4)
- msb_at_bit33 = (substream->runtime->dma_addr &
0x100000000) ? 1
-
- memif->phys_buf_addr = substream->runtime->dma_addr &
0xffffffff;
+ msb_at_bit33 = upper_32_bits(substream->runtime->dma_addr) ? 1 :
0;
+ memif->phys_buf_addr =
lower_32_bits(substream->runtime->dma_addr);


Dose this change follow your idea?
Thanks!

PC Liao

\
 
 \ /
  Last update: 2016-01-12 04:21    [W:0.055 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site