lkml.org 
[lkml]   [2016]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Input: elantech - mark protocols v2 and v3 as semi-mt
On Mon, Jan 11, 2016 at 11:09:00AM +0100, Benjamin Tissoires wrote:
> When using a protocol v2 or v3 hardware, elantech uses the function
> elantech_report_semi_mt_data() to report data. This devices are rather
> creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid
> touch is reported.
>
> Anyway, userspace (libinput) is now confused by these (0,0) touches,
> and detect them as palm, and rejects them.
>
> Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW")
> was sufficient enough for xf86-input-synaptics and libinput before it has
> palm rejection. Now we need to actually tell libinput that this device is
> a semi-mt one and it should not rely on the actual values of the 2 touches.
>
> Cc: stable@vger.kernel.org
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Applied, thank you.

> ---
> drivers/input/mouse/elantech.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
> index 537ebb0..78f93cf 100644
> --- a/drivers/input/mouse/elantech.c
> +++ b/drivers/input/mouse/elantech.c
> @@ -1222,7 +1222,7 @@ static int elantech_set_input_params(struct psmouse *psmouse)
> input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
> ETP_WMAX_V2, 0, 0);
> }
> - input_mt_init_slots(dev, 2, 0);
> + input_mt_init_slots(dev, 2, INPUT_MT_SEMI_MT);
> input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
> input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
> break;
> --
> 2.5.0
>

--
Dmitry

\
 
 \ /
  Last update: 2016-01-12 03:01    [W:0.054 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site