lkml.org 
[lkml]   [2015]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH linux-next v9 2/3] mfd: devicetree: add bindings for Atmel Flexcom
From
Date
On 09/09/2015 10:45 AM, Cyrille Pitchen wrote:
> Hi Rob,
>
> Le 09/09/2015 01:40, Rob Herring a écrit :
>> On 09/01/2015 09:46 AM, Cyrille Pitchen wrote:
>>> This patch documents the DT bindings for the Atmel Flexcom which will be
>>> introduced by sama5d2x SoCs. These bindings will be used by the actual
>>> Flexcom driver to be sent in another patch.
>>>
>>> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
>>> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
>>> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
>>
>> A few comments, but in general looks fine.
>>
>>> ---
>>> .../devicetree/bindings/mfd/atmel-flexcom.txt | 67 ++++++++++++++++++++++
>>> 1 file changed, 67 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
>>> new file mode 100644
>>> index 000000000000..fc3511e41542
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
>>> @@ -0,0 +1,67 @@
>>> +* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
>>> +
>>> +The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
>>> +controller and an USART. Only one function can be used at a time and is chosen
>>> +at boot time according to the device tree.
>>
>> Doesn't the board design choose (unless pins go to a header)?
>>
>
> The function may be chosen once for all by the board design but if we take the
> sama5d2 xplained board as an example, most Flexcoms output their pins to
> headers.
>
>>> +
>>> +Required properties:
>>> +- compatible: Should be "atmel,sama5d2-flexcom"
>>> +- reg: Should be the offset/length value for Flexcom dedicated
>>> + I/O registers (without USART, TWI or SPI registers).
>>> +- clocks: Should be the Flexcom peripheral clock from PMC.
>>> +- #address-cells: Should be <1>
>>> +- #size-cells: Should be <1>
>>> +- ranges: Should be one range for the full I/O register region
>>> + (including USART, TWI and SPI registers).
>>> +- atmel,flexcom-mode: Should be one of the 3 following macros as defined in
>>> + include/dt-bindings/mfd/atmel-flexcom.h:
>>> + - ATMEL_FLEXCOM_MODE_USART for USART
>>> + - ATMEL_FLEXCOM_MODE_SPI for SPI
>>> + - ATMEL_FLEXCOM_MODE_TWI for I2C
>>> +
>>> +Required child:
>>> +a single child device of type matching the "atmel,flexcom-mode" property.
>>
>> Okay, but why not allow all children and use "status"?
>>
>
> That is exactly what was proposed in v6 of this series: allow more than one
> child so possibly all children but only one "available" child (status =
> "okay").
>
> The Flexocm driver still needs to find out the type of device of this
> available child to know which function is to be enabled (USART, I2C or SPI).
> So the "compatible" attribute was parsed using strstr() to search on of the
> patterns "usart", "spi" or "i2c".
>
> However the use of strstr() was discussed to know whether the driver should
> looks for a partial or an exact match of the "compatible" string.
> An exact match would require to keep the Flexcom driver synchonized with the
> 3 other drivers every time one of them introduces a new compatibility string,
> which whould have made every driver more difficult to maintain by creating a
> useless dependency.
> So this implementation relying on the "compatible" attribute was abandoned.
>
> To sum up, no other reliable (and simple) means to guess/extact the device
> type from its DT node was found so we got back to the "atmel,flexcom-mode"
> property.

I wasn't thinking removing this property. If the mode is configured by
the bootloader, then you want to make updates to the configuration as
simple as possible. Updating atmel,flexcom-mode and status for the
children would be much more simple than creating the whole child node.
If that's not a valid usecase, then never mind.

Rob



\
 
 \ /
  Last update: 2015-09-10 02:21    [W:0.067 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site