lkml.org 
[lkml]   [2015]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v18 0/4] ARM: rk3288: Add PM Domain support
Date
Thank you all for providing inputs and comments on previous versions of
this patchset.
Especially thanks to the (Kevin, Heiko, Dmitry, Doug, ULF, Michael....).

Add power domain drivers based on generic power domain for
Rockchip platform, and support RK3288 SoCs.

Verified on url =
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/v3.14
localhost / # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
domain status slaves
/device runtime status
----------------------------------------------------------------------
pd_video off
/devices/ff9a0800.iommu suspended
/devices/ff9a0000.video-codec suspended
pd_vio on
/devices/ff930300.iommu suspended
/devices/ff940300.iommu suspended
/devices/ff930000.vop suspended
/devices/ff940000.vop suspended
/devices/ff980000.hdmi unsupported
/devices/rockchip-edp unsupported
pd_hevc off
pd_gpu off
/devices/ffa30000.gpu suspended

The following is the easy example.

vopb: vop@ff930000 {
compatible = "rockchip,rk3288-vop";
...
iommus = <&vopb_mmu>;
power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
...
};

vopb_mmu: iommu@ff930300 {
compatible = "rockchip,iommu";
...
interrupt-names = "vopb_mmu";
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
...
};

vopl: vop@ff940000 {
compatible = "rockchip,rk3288-vop";
reg = <0xff940000 0x19c>;
...
iommus = <&vopl_mmu>;
power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
...
};

vopl_mmu: iommu@ff940300 {
compatible = "rockchip,iommu";
...
interrupt-names = "vopl_mmu";
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};

Others, we can verify this driver for the EDP.
We can apply the following these patchs.

6967631 New [v2,1/8] drm: exynos/dp: fix code style
6967741 New [v2,2/8] drm: exynos/dp: convert to drm bridge mode
6967801 New [v2,3/8] drm: bridge: analogix_dp: split exynos dp driver to bridge dir
6967791 New [v2,4/8] drm: rockchip/dp: add rockchip platform dp driver
6968031 New [v2,5/8] drm: bridge/analogix_dp: add platform device type support
6968141 New [v2,6/8] drm: bridge: analogix_dp: add some rk3288 special registers setting
6967941 New [v2,7/8] drm: bridge: analogix_dp: try force hpd after plug in lookup failed
6967971 New [v2,8/8] drm: bridge/analogix_dp: expand the delay time for hpd detect

There is a recent addition from Linus Walleij,
called simple-mfd [a] that is supposed to get added real early for kernel 4.2

[a]:
https://git.kernel.org/cgit/linux/kernel/git/linusw/linux-integrator.git/commit/?id=fcf294c020ff7ee4e3b1e96159e4dc7a17ad5

Here is my branch, Tested by chromeos-3.14 and next-kernel.

e81a4d2 ARM: dts: add the support power-domain node on RK3288 SoCs
38eec06 soc: rockchip: power-domain: Add power domain driver
086d4f3 ARM: power-domain: rockchip: add all the domain type on RK3288 SoCs
498fd14 dt-bindings: add document of Rockchip power domains
4e4adb2 Merge tag 'nfs-for-4.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
77a7880 Merge tag 'xfs-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
5445b1f NFSv4: Respect the server imposed limit on how many changes we may cache
7d160a6 NFSv4: Express delegation limit in units of pages
7d9071a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
bd77966 Merge tag 'for-linus-4.3-merge-window-part-1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
9cfcc65 Merge tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/li
......


Changes in v18:
- remove the notes of domains from dt-binding.
- As Kevin suggestion, set pd->num_clks = 0 in
rockchip_pm_remove_one_domain() ans add the mutex for protect
- assign the order in rk3288_pm_domains[] in pm-domain driver.
- Change the index order in the dts on PATCH [4/4] .
- Add some notes for domains in the dts on PATCH [4/4].

Changes in v17:
- add the decription in detail for RK3288 SoCs.
- delete the ugly chart in the commit.
- (re)defining config for ROCKCHIP.
- remove clocks of the HDMI ctrl.
- update the description.
- add Reviewed-by: Michale.

Changes in v16:
- remove the pmu node.
- Add more domain decription.
- the driver type from tristate to bool.
- Letter misspelled.
- As Ulf suggestion, remove #include <linux/clk-provider.h>,
use "%pC" as the formatting string for the dev_dbg().
- As the Ulf suggestion, set the genpd->flags to assign the
->stop|start() callbacks.
- Manually copy the problem in patch v15.
- rebase the description.

Changes in v15:
- change the comment.
- As the kevin suggestion, put the power-domain driver into driver/soc/vendor.
- As Heiko suggestion, Patch 1: binding doc, 2: binding-header, 3: driver,
4: dts-changes.
- return -ENXIO --> return -ENODEV.
- As Tomasz remarked previously the dts should represent the hardware
and the power-domains are part of the pmu.

Changes in v14:
- does not need to set an owner,remove the "THIS_MODULE".
- Remove essential clocks from rk3288 PD_VIO domain, Some clocks are
essential for the system health and should not be turned down.
However there is no owner for them so if they listed as belonging to power
domain we'll try toggling them up and down during power domain transition.
As a result we either fail to suspend or resume the system.

Changes in v13:
- Remove essential clocks from rk3288 PD_VIO domain Some clocks are essential
for the system health and should not be turned down. However there is no owner
for them so if they listed as belonging to power domain we'll try toggling them
up and down during power domain.
- Device drivers expect their devices to be powered on before their
probing code is invoked. To achieve that we should start with
power domains powered on (we may turn them off later once all devices enable
runtime powermanagment and go idle).
- This change switches Rockchip power domain driver to use updated
device_attach and device_detach API.
- set the gpu/core power domain power delay time.
- fix enumerating PM clocks for devices.
- fix use after free We can't use clk after we did clk_put(clk).

Changes in v12:
- fix the title doamin->domain.
- updated device_attach and device_detach API,otherwise it will
compile fail on next kernel.

Changes in v11:
- fix pm_genpd_init(&pd->genpd, NULL, false).

Changes in v10:
- this switches over domain infos to use masks instead of recomputing
them each time and also gets rid of custom domain translator and
uses standard onecell on.
- fix missing the #include <dt-bindings/power-domain/rk3288.h>.
- remove the notes.

Changes in v9:
- add document decription.
- fix v8 changes as follows:
- This reconciles the v2 and v7 code so that we power domain have lists of clocks
they trigger on and off during power transitions and independently from power
domains clocks. We attach clocks to devices comprising power domain and prepare
them so they are turn on and off by runtime PM.
- add rockchip_pm_add_one_domain() to control domains.
- add pd_start/pd_stop interface to control clocks.
- add decription for power-doamin node.

Changes in v8:
- document go back to v2.
- This reconciles the v2 and v7 code so that we power domain have
lists of clocks they toggle on and off during power transitions
and independently from power domains clocks we attach clocks to
devices comprising power domain and prepare them so they are
turn on and off by runtime PM.
- DTS go back to v2.

Changes in v7:
- Delete unused variables

Changes in v6:
- delete pmu_lock.
- modify dev_lock using mutex.
- pm_clk_resume(pd->dev) change to pm_clk_resume(ed->dev).
- pm_clk_suspend(pd->dev) change to pm_clk_suspend(ed->dev).
- add devm_kfree(pd->dev, de) in rockchip_pm_domain_detach_dev.

Changes in v5:
- delete idle_lock.
- add timeout in rockchip_pmu_set_idle_request().

Changes in v4:
- use list storage dev.

Changes in v3:
- DT structure has changed.
- change use pm_clk_resume() and pm_clk_suspend().
- Decomposition power-controller, changed to multiple controller
(gpu-power-controller, hevc-power-controller).

Changes in v2:
- move clocks to "optional".
- remove the "pd->pd.of_node = np".
- make pd_vio clocks all one entry per line and alphabetize.
- power: power-controller move back to pinctrl: pinctrl.

Caesar Wang (4):
dt-bindings: add document of Rockchip power domains
ARM: power-domain: rockchip: add all the domain type on RK3288 SoCs
soc: rockchip: power-domain: Add power domain driver
ARM: dts: add the support power-domain node on RK3288 SoCs

.../bindings/soc/rockchip/power_domain.txt | 46 ++
arch/arm/boot/dts/rk3288.dtsi | 93 +++-
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/rockchip/Kconfig | 14 +
drivers/soc/rockchip/Makefile | 4 +
drivers/soc/rockchip/pm_domains.c | 490 +++++++++++++++++++++
include/dt-bindings/power-domain/rk3288.h | 31 ++
8 files changed, 679 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
create mode 100644 drivers/soc/rockchip/Kconfig
create mode 100644 drivers/soc/rockchip/Makefile
create mode 100644 drivers/soc/rockchip/pm_domains.c
create mode 100644 include/dt-bindings/power-domain/rk3288.h

--
1.9.1



\
 
 \ /
  Last update: 2015-09-08 08:41    [W:0.126 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site