lkml.org 
[lkml]   [2015]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] regulator: act8865: support output voltage by VSET2[] bits
Date
For the step-down DC/DC regulators, the output voltage is
selectable by setting VSEL pin that when VSEL is low, output
voltage is programmed by VSET1[] bits, and when VSEL is high,
output voltage is programmed by VSET2[] bits.

The DT property "active-semi,vsel-high" is used to specify
the VSEL pin at high on the board.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

drivers/regulator/act8865-regulator.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 896db16..e2b50f3 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -261,6 +261,16 @@ static const struct regulator_desc act8865_regulators[] = {
ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
};

+static const struct regulator_desc act8865_alt_regulators[] = {
+ ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2),
+ ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2),
+ ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2),
+ ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET),
+ ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET),
+ ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET),
+ ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET),
+};
+
#ifdef CONFIG_OF
static const struct of_device_id act8865_dt_ids[] = {
{ .compatible = "active-semi,act8600", .data = (void *)ACT8600 },
@@ -413,6 +423,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
struct act8865 *act8865;
unsigned long type;
int off_reg, off_mask;
+ int voltage_select;

pdata = dev_get_platdata(dev);

@@ -424,6 +435,10 @@ static int act8865_pmic_probe(struct i2c_client *client,
return -ENODEV;

type = (unsigned long) id->data;
+
+ voltage_select = !!of_get_property(dev->of_node,
+ "active-semi,vsel-high",
+ NULL);
} else {
type = i2c_id->driver_data;
}
@@ -442,8 +457,13 @@ static int act8865_pmic_probe(struct i2c_client *client,
off_mask = ACT8846_OFF_SYSMASK;
break;
case ACT8865:
- regulators = act8865_regulators;
- num_regulators = ARRAY_SIZE(act8865_regulators);
+ if (voltage_select) {
+ regulators = act8865_alt_regulators;
+ num_regulators = ARRAY_SIZE(act8865_alt_regulators);
+ } else {
+ regulators = act8865_regulators;
+ num_regulators = ARRAY_SIZE(act8865_regulators);
+ }
off_reg = ACT8865_SYS_CTRL;
off_mask = ACT8865_MSTROFF;
break;
--
1.7.9.5


\
 
 \ /
  Last update: 2015-09-30 09:01    [W:0.893 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site