lkml.org 
[lkml]   [2015]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mtd: nand: omap2: Rename shippable module to omap2_nand
From
Date
On 03/09/15 00:06, Brian Norris wrote:
> On Fri, Aug 21, 2015 at 01:45:35PM +0300, Roger Quadros wrote:
>> As both omap2 onenand and omap2 nand driver modules are
>> named the same i.e. "omap2.ko", only one of them gets shipped
>> during MODPOST if both are configured as loadable modules.
>>
>> To avoid this ambiguity let's ship the omap2 nand
>> driver as "omap2_nand.ko"
>>
>> Reported by Pierre Neyron via github
>> https://github.com/beagleboard/linux/issues/40
>>
>> Cc: Robert Nelson <robertcnelson@gmail.com>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>> drivers/mtd/nand/Makefile | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
>> index 1f897ec..075a027 100644
>> --- a/drivers/mtd/nand/Makefile
>> +++ b/drivers/mtd/nand/Makefile
>> @@ -26,7 +26,8 @@ obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
>> obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
>> obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
>> obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o
>> -obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o
>> +omap2_nand-objs := omap2.o
>> +obj-$(CONFIG_MTD_NAND_OMAP2) += omap2_nand.o
>
> Pushed to l2-mtd.git. I suppose this one should go out for 4.3, as
> there's little downside to it, and it's kind of a bugfix.

That is perfectly fine. Thanks.

cheers,
-roger

>
>> obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD) += omap_elm.o
>> obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
>> obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
>> --
>> 2.1.4
>>


\
 
 \ /
  Last update: 2015-09-03 10:21    [W:0.040 / U:0.200 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site