lkml.org 
[lkml]   [2015]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: stop breaking dosemu (Re: x86/kconfig/32: Rename CONFIG_VM86 and default it to 'n')
From
Date
03.09.2015 20:21, Andy Lutomirski пишет:
> On Thu, Sep 3, 2015 at 10:19 AM, Stas Sergeev <stsp@list.ru> wrote:
>> 03.09.2015 19:57, Linus Torvalds пишет:
>>> On Thu, Sep 3, 2015 at 8:44 AM, Austin S Hemmelgarn
>>> <ahferroin7@gmail.com> wrote:
>>>>
>>>> This lets you turn this on or off at runtime.
>>>
>>> Tangential aside: we already effectively have a flag that could turn
>>> off vm86 mode dynamically: /proc/sys/vm/mmap_min_addr.
>>>
>>> Sadly (or not) we default it to 4096, which still leaves vm86 mode
>>> usable, although it effectively disables *dos* use for it. Which is
>>> kind of the worst of both worlds: you can use the vm86() system call
>>> for bad things (if you can find a hole in it), but you probably cannot
>>> actually use it for DOS emulation, because the traditional BIOS data
>>> segment is at 0040.
>>>
>>> Anyway, what that means is that pretty much the only *valid* use of
>>> vm86() mode is probably when the system maintainer has set
>>> 'mmap_min_addr' to zero. So we could probably use that as an already
>>> existing flag that disallows vm86 by our current default values.
>>>
>>> Stas - can you confirm that to actually use vm86 mode, you end up
>>> setting that mmap_min_addr thing to zero? Or do you end up using a
>>> mixed-mode setup, where you use vm86() for most things, but emulate
>>> things that trap in the zero page?
>> Yes, good point.
>> dosemu complains about /proc/sys/vm/mmap_min_addr.
>> Trapping on zero-page access will likely not work, because
>> IIRC some distros raise that value even more.
>> So yes, please use that to completely disable vm86().
>> You won't even break dosemu's checks, because it (obviously)
>> tries mmap() before trying vm86().
>>
>
> I'm okay with that. Shall I send a patch?
I wonder if this patch will also stop calling it an attack surface. :)

> There's also vbetool, but I think that almost everyone considers it
> dead at this point, and it seems reasonably likely that it needs
> mmap_min_addr == 0 as well.
Most certainly, as vbios IIRC wants to read the addresses around 0x400,
which it fills during POST.
At least when dosemu used to map real vbios (long time ago), it also
used to copy these values from /dev/mem, and they are within the first page.


\
 
 \ /
  Last update: 2015-09-03 20:01    [W:0.073 / U:2.064 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site