lkml.org 
[lkml]   [2015]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v4 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role
From
Date
On 02/09/15 20:22, Sergei Shtylyov wrote:
> Hello.
>
> On 09/02/2015 05:24 PM, Roger Quadros wrote:
>
>> We can't rely just on dr_mode to decide if we're in host or gadget
>> mode when we're configured as otg/dual-role. So while dr_mode is
>> OTG, we find out from the otg state machine if we're in host
>> or gadget mode and take the necessary actions during suspend/resume.
>>
>> Also make sure that we disable OTG irq and events during system suspend
>> so that we don't lockup the system during system suspend/resume.
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>> drivers/usb/dwc3/core.c | 27 +++++++++------------------
>> 1 file changed, 9 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 654aebf..25891e3 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -1455,18 +1455,15 @@ static int dwc3_suspend(struct device *dev)
>> dwc->octl = dwc3_readl(dwc->regs, DWC3_OCTL);
>> dwc->oevt = dwc3_readl(dwc->regs, DWC3_OEVT);
>> dwc->oevten = dwc3_readl(dwc->regs, DWC3_OEVTEN);
>> + dwc3_writel(dwc->regs, DWC3_OEVTEN, 0);
>> + disable_irq(dwc->otg_irq);
>> }
>>
>> - switch (dwc->dr_mode) {
>> - case USB_DR_MODE_PERIPHERAL:
>> - case USB_DR_MODE_OTG:
>> + if (dwc->dr_mode == USB_DR_MODE_PERIPHERAL ||
>> + ((dwc->dr_mode == USB_DR_MODE_OTG) && (dwc->fsm->protocol == PROTO_GADGET)))
>
> Hm, you're not very consistent about your parens. :-)

You're right. Should be

if ((dwc->dr_mode == USB_DR_MODE_PERIPHERAL) ||
((dwc->dr_mode == USB_DR_MODE_OTG) && (dwc->fsm->protocol == PROTO_GADGET)))


>
> [...]
>> @@ -1506,18 +1503,12 @@ static int dwc3_resume(struct device *dev)
>> dwc3_writel(dwc->regs, DWC3_OCTL, dwc->octl);
>> dwc3_writel(dwc->regs, DWC3_OEVT, dwc->oevt);
>> dwc3_writel(dwc->regs, DWC3_OEVTEN, dwc->oevten);
>> + enable_irq(dwc->otg_irq);
>> }
>>
>> - switch (dwc->dr_mode) {
>> - case USB_DR_MODE_PERIPHERAL:
>> - case USB_DR_MODE_OTG:
>> + if (dwc->dr_mode == USB_DR_MODE_PERIPHERAL ||
>> + ((dwc->dr_mode == USB_DR_MODE_OTG) && (dwc->fsm->protocol == PROTO_GADGET)))
>
> Same here...

--
cheers,
-roger


\
 
 \ /
  Last update: 2015-09-03 16:21    [W:0.086 / U:6.140 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site