Messages in this thread | | | Subject | Re: [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support | From | Kishon Vijay Abraham I <> | Date | Tue, 29 Sep 2015 18:54:26 +0530 |
| |
Hi,
On Monday 28 September 2015 09:33 PM, Ray Jui wrote: > Hi Kishon, > > Is there any more change that you want me to make with this patch series?
Nope. The patch looks good, I'll be merging it soonish.
Thanks Kishon
> > Thanks, > > Ray > > On 9/21/2015 10:17 AM, Ray Jui wrote: >> This patch series adds support for the Cygnus PCIe PHY >> >> This patch series is based on Linux v4.3-rc1 and is avaliable in: >> https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v5 >> >> Changes from v4: >> - Add comment to explain the required 50 ms wait after PCIe AFE is brought >> up >> - Change some of 'dev_info' print to 'dev_dbg' >> >> Changes from v3: >> - Modify the driver to use child node to represent each PCIe PHY >> - Update device tree binding document and examples accordingly >> - Add owner filed in phy ops >> >> Changes from v2: >> - Dropped MDC/MDIO bus driver since it's not needed to enable/disable the >> analog-front-end of the PCIe Serdes on Cygnus >> - Optimized delay waiting for PCIe analog-front-end to be fully enabled >> - Reduce the #phy-cell to 1 since now the MDIO PHY ID is not required >> >> Changes from v1: >> - Move the MDC/MDIO bus driver from drivers/phy/* to drivers/bus/* >> - Make the PCIe PHY device node child node of the MDIO bus >> - Change the PCIe PHY driver to tristate so it can be compiled as a module >> - Other minor changes >> >> Ray Jui (2): >> dt-bindings: Add Cygnus PCIe PHY binding doc >> phy: cygnus: pcie: Add Cygnus PCIe PHY support >> >> .../bindings/phy/brcm,cygnus-pcie-phy.txt | 47 +++++ >> drivers/phy/Kconfig | 9 + >> drivers/phy/Makefile | 1 + >> drivers/phy/phy-bcm-cygnus-pcie.c | 213 +++++++++++++++++++++ >> 4 files changed, 270 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt >> create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c >>
| |