lkml.org 
[lkml]   [2015]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
From
Date
Hi,

Am 27.09.2015 um 17:21 schrieb Jonathan Cameron <jic23@kernel.org>:

> On 23/09/15 13:48, H. Nikolaus Schaller wrote:
>> This driver code was found as:
>>
>> https://android.googlesource.com/kernel/tegra/+/aaabb2e045f31e5a970109ffdaae900dd403d17e/drivers/staging/iio/adc
>>
>> Fixed various compilation issues and test this driver on omap5 evm.
>>
>> Signed-off-by: Pradeep Goudagunta <pgoudagunta@nvidia.com>
>> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
>> Signed-off-by: Marek Belisko <marek@goldelico.com>
> Various bits inline.

thanks for the valuable comments!

Will work into V2.

Nikolaus

>
> Jonathan
>> ---
>> drivers/iio/adc/Kconfig | 9 +
>> drivers/iio/adc/Makefile | 1 +
>> drivers/iio/adc/palmas_gpadc.c | 797 +++++++++++++++++++++++++++++++++++++++++
>> include/linux/mfd/palmas.h | 59 ++-
>> 4 files changed, 862 insertions(+), 4 deletions(-)
>> create mode 100644 drivers/iio/adc/palmas_gpadc.c
>>
>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>> index eb0cd89..f6df9db 100644
>> --- a/drivers/iio/adc/Kconfig
>> +++ b/drivers/iio/adc/Kconfig
>> @@ -242,6 +242,15 @@ config NAU7802
>> To compile this driver as a module, choose M here: the
>> module will be called nau7802.
>>
>> +config PALMAS_GPADC
>> + tristate "TI Palmas General Purpose ADC"
>> + depends on MFD_PALMAS
>> + help
>> + Palmas series pmic chip by texas Instruments (twl6035/6037)
>> + is used in smartphones and tablets and supports a 16 channel
>> + general purpose ADC. Add iio driver to read different channel
>> + of the GPADCs.
>> +
>> config QCOM_SPMI_IADC
>> tristate "Qualcomm SPMI PMIC current ADC"
>> depends on SPMI
>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>> index a096210..716f112 100644
>> --- a/drivers/iio/adc/Makefile
>> +++ b/drivers/iio/adc/Makefile
>> @@ -26,6 +26,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
>> obj-$(CONFIG_MCP3422) += mcp3422.o
>> obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
>> obj-$(CONFIG_NAU7802) += nau7802.o
>> +obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
>> obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
>> obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
>> obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
>> diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
>> new file mode 100644
>> index 0000000..17abb28
>> --- /dev/null
>> +++ b/drivers/iio/adc/palmas_gpadc.c
>> @@ -0,0 +1,797 @@
>> +/*
>> + * palmas-adc.c -- TI PALMAS GPADC.
>> + *
>> + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
>> + *
>> + * Author: Pradeep Goudagunta <pgoudagunta@nvidia.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + */
>> +#include <linux/module.h>
>> +#include <linux/err.h>
>> +#include <linux/irq.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/delay.h>
>> +#include <linux/i2c.h>
>> +#include <linux/pm.h>
>> +#include <linux/mfd/palmas.h>
>> +#include <linux/completion.h>
>> +#include <linux/iio/iio.h>
>> +#include <linux/iio/machine.h>
>> +#include <linux/iio/driver.h>
>> +
>> +#define MOD_NAME "palmas-gpadc"
>> +#define ADC_CONVERSION_TIMEOUT (msecs_to_jiffies(5000))
>> +#define TO_BE_CALCULATED 0
>> +
>> +struct palmas_gpadc_info {
>> +/* calibration codes and regs */
> Full docs on this would be appreciated.
>> + int x1;
>> + int x2;
>> + int v1;
>> + int v2;
>> + u8 trim1_reg;
>> + u8 trim2_reg;
>> + int gain;
>> + int offset;
>> + int gain_error;
>> + bool is_correct_code;
>> +};
>> +
>> +#define PALMAS_ADC_INFO(_chan, _x1, _x2, _v1, _v2, _t1, _t2, _is_correct_code)\
>> +[PALMAS_ADC_CH_##_chan] = { \
>> + .x1 = _x1, \
>> + .x2 = _x2, \
>> + .v1 = _v1, \
>> + .v2 = _v2, \
>> + .gain = TO_BE_CALCULATED, \
>> + .offset = TO_BE_CALCULATED, \
>> + .gain_error = TO_BE_CALCULATED, \
>> + .trim1_reg = PALMAS_GPADC_TRIM##_t1, \
>> + .trim2_reg = PALMAS_GPADC_TRIM##_t2, \
>> + .is_correct_code = _is_correct_code \
>> + }
>> +
>> +static struct palmas_gpadc_info palmas_gpadc_info[] = {
>> + PALMAS_ADC_INFO(IN0, 2064, 3112, 630, 950, 1, 2, false),
>> + PALMAS_ADC_INFO(IN1, 2064, 3112, 630, 950, 1, 2, false),
>> + PALMAS_ADC_INFO(IN2, 2064, 3112, 1260, 1900, 3, 4, false),
>> + PALMAS_ADC_INFO(IN3, 2064, 3112, 630, 950, 1, 2, false),
>> + PALMAS_ADC_INFO(IN4, 2064, 3112, 630, 950, 1, 2, false),
>> + PALMAS_ADC_INFO(IN5, 2064, 3112, 630, 950, 1, 2, false),
>> + PALMAS_ADC_INFO(IN6, 2064, 3112, 2520, 3800, 5, 6, false),
>> + PALMAS_ADC_INFO(IN7, 2064, 3112, 2520, 3800, 7, 8, false),
>> + PALMAS_ADC_INFO(IN8, 2064, 3112, 3150, 4750, 9, 10, false),
>> + PALMAS_ADC_INFO(IN9, 2064, 3112, 5670, 8550, 11, 12, false),
>> + PALMAS_ADC_INFO(IN10, 2064, 3112, 3465, 5225, 13, 14, false),
>> + PALMAS_ADC_INFO(IN11, 0, 0, 0, 0, INVALID, INVALID, true),
>> + PALMAS_ADC_INFO(IN12, 0, 0, 0, 0, INVALID, INVALID, true),
>> + PALMAS_ADC_INFO(IN13, 0, 0, 0, 0, INVALID, INVALID, true),
>> + PALMAS_ADC_INFO(IN14, 2064, 3112, 3645, 5225, 15, 16, false),
>> + PALMAS_ADC_INFO(IN15, 0, 0, 0, 0, INVALID, INVALID, true),
>> +};
>> +
>> +struct palmas_gpadc {
>> + struct device *dev;
>> + struct palmas *palmas;
> As there are some non obvious elements in here (such as the next two)
> kernel-doc for the whole stucture would be good.
>
>> + u8 ch0_current;
>> + u8 ch3_current;
>> + bool extended_delay;
>> + int irq;
>> + int irq_auto_0;
>> + int irq_auto_1;
>> + struct palmas_gpadc_info *adc_info;
>> + struct completion conv_completion;
>> + struct palmas_adc_wakeup_property wakeup1_data;
>> + struct palmas_adc_wakeup_property wakeup2_data;
>> + bool wakeup1_enable;
>> + bool wakeup2_enable;
>> + int auto_conversion_period;
>> +};
>> +
>> +/*
>> + * GPADC lock issue in AUTO mode.
>> + * Impact: In AUTO mode, GPADC conversion can be locked after disabling AUTO
>> + * mode feature.
>> + * Details:
>> + * When the AUTO mode is the only conversion mode enabled, if the AUTO
>> + * mode feature is disabled with bit GPADC_AUTO_CTRL. AUTO_CONV1_EN = 0
>> + * or bit GPADC_AUTO_CTRL. AUTO_CONV0_EN = 0 during a conversion, the
>> + * conversion mechanism can be seen as locked meaning that all following
>> + * conversion will give 0 as a result. Bit GPADC_STATUS.GPADC_AVAILABLE
>> + * will stay at 0 meaning that GPADC is busy. An RT conversion can unlock
>> + * the GPADC.
>> + *
>> + * Workaround(s):
>> + * To avoid the lock mechanism, the workaround to follow before any stop
>> + * conversion request is:
>> + * Force the GPADC state machine to be ON by using the GPADC_CTRL1.
>> + * GPADC_FORCE bit = 1
>> + * Shutdown the GPADC AUTO conversion using
>> + * GPADC_AUTO_CTRL.SHUTDOWN_CONV[01] = 0.
>> + * After 100us, force the GPADC state machine to be OFF by using the
>> + * GPADC_CTRL1. GPADC_FORCE bit = 0
>> + */
>> +static int palmas_disable_auto_conversion(struct palmas_gpadc *adc)
>> +{
>> + int ret;
>> +
>> + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_CTRL1,
>> + PALMAS_GPADC_CTRL1_GPADC_FORCE,
>> + PALMAS_GPADC_CTRL1_GPADC_FORCE);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "GPADC_CTRL1 update failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_AUTO_CTRL,
>> + PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1 |
>> + PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0,
>> + 0);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "AUTO_CTRL update failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + udelay(100);
>> +
>> + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_CTRL1,
>> + PALMAS_GPADC_CTRL1_GPADC_FORCE, 0);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "GPADC_CTRL1 update failed: %d\n", ret);
>> + return ret;
>> + }
> return ret and drop the return above. Coccicheck will moan at you about
> this.
>> + return 0;
>> +}
>> +
>> +static irqreturn_t palmas_gpadc_irq(int irq, void *data)
>> +{
>> + struct palmas_gpadc *adc = data;
>> +
>> + complete(&adc->conv_completion);
> blank line.
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static irqreturn_t palmas_gpadc_irq_auto(int irq, void *data)
>> +{
>> + struct palmas_gpadc *adc = data;
>> +
>> + dev_info(adc->dev, "Threshold interrupt %d occurs\n", irq);
> Could indicate this to userspace... other than through the logs.
>
>> + palmas_disable_auto_conversion(adc);
> blank line generally before all function returns..
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int palmas_gpadc_start_mask_interrupt(struct palmas_gpadc *adc, int mask)
>
> mask is boolean. Make it explicitly so for readability.
>
>> +{
>> + int ret;
>> +
>> + if (!mask)
>> + ret = palmas_update_bits(adc->palmas, PALMAS_INTERRUPT_BASE,
>> + PALMAS_INT3_MASK,
>> + PALMAS_INT3_MASK_GPADC_EOC_SW, 0);
>> + else
>> + ret = palmas_update_bits(adc->palmas, PALMAS_INTERRUPT_BASE,
>> + PALMAS_INT3_MASK,
>> + PALMAS_INT3_MASK_GPADC_EOC_SW,
>> + PALMAS_INT3_MASK_GPADC_EOC_SW);
>> + if (ret < 0)
>> + dev_err(adc->dev, "GPADC INT MASK update failed: %d\n", ret);
>> +
>> + return ret;
>> +}
>> +
>> +static int palmas_gpadc_enable(struct palmas_gpadc *adc, int adc_chan,
>> + int enable)
>> +{
>> + unsigned int mask, val;
>> + int ret;
>> +
>> + if (enable) {
>> + val = (adc->extended_delay
>> + << PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT);
>> + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_RT_CTRL,
>> + PALMAS_GPADC_RT_CTRL_EXTEND_DELAY, val);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "RT_CTRL update failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + mask = (PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_MASK |
>> + PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_MASK |
>> + PALMAS_GPADC_CTRL1_GPADC_FORCE);
>> + val = (adc->ch0_current
>> + << PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT);
>> + val |= (adc->ch3_current
>> + << PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT);
>> + val |= PALMAS_GPADC_CTRL1_GPADC_FORCE;
>> + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_CTRL1, mask, val);
>> + if (ret < 0) {
>> + dev_err(adc->dev,
>> + "Failed to update current setting: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + mask = (PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK |
>> + PALMAS_GPADC_SW_SELECT_SW_CONV_EN);
>> + val = (adc_chan | PALMAS_GPADC_SW_SELECT_SW_CONV_EN);
>> + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_SW_SELECT, mask, val);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "SW_SELECT update failed: %d\n", ret);
>> + return ret;
>> + }
>> + } else {
>> + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_SW_SELECT, 0);
>> + if (ret < 0)
>> + dev_err(adc->dev, "SW_SELECT write failed: %d\n", ret);
>> +
>> + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_CTRL1,
>> + PALMAS_GPADC_CTRL1_GPADC_FORCE, 0);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "CTRL1 update failed: %d\n", ret);
>> + return ret;
>> + }
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int palmas_gpadc_read_prepare(struct palmas_gpadc *adc, int adc_chan)
>> +{
>> + int ret;
>> +
>> + ret = palmas_gpadc_enable(adc, adc_chan, true);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return palmas_gpadc_start_mask_interrupt(adc, 0);
>> +}
>> +
>> +static void palmas_gpadc_read_done(struct palmas_gpadc *adc, int adc_chan)
>> +{
>> + palmas_gpadc_start_mask_interrupt(adc, 1);
>> + palmas_gpadc_enable(adc, adc_chan, false);
>> +}
>> +
>> +static int palmas_gpadc_calibrate(struct palmas_gpadc *adc, int adc_chan)
>> +{
>> + int k;
>> + int d1;
>> + int d2;
>> + int ret;
>> + int gain;
>> + int x1 = adc->adc_info[adc_chan].x1;
>> + int x2 = adc->adc_info[adc_chan].x2;
>> + int v1 = adc->adc_info[adc_chan].v1;
>> + int v2 = adc->adc_info[adc_chan].v2;
>> +
>> + ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
>> + adc->adc_info[adc_chan].trim1_reg, &d1);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "TRIM read failed: %d\n", ret);
>> + goto scrub;
>> + }
>> +
>> + ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
>> + adc->adc_info[adc_chan].trim2_reg, &d2);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "TRIM read failed: %d\n", ret);
>> + goto scrub;
>> + }
>> +
>> + /*Gain error Calculation*/
>> + k = (1000 + (1000 * (d2 - d1)) / (x2 - x1));
>> +
>> + /*Gain Calculation*/
>> + gain = ((v2 - v1) * 1000) / (x2 - x1);
>> +
>> + adc->adc_info[adc_chan].gain_error = k;
>> + adc->adc_info[adc_chan].gain = gain;
>> + /*offset Calculation*/
>> + adc->adc_info[adc_chan].offset = (d1 * 1000) - ((k - 1000) * x1);
>> +
>> +scrub:
>> + return ret;
>> +}
>> +
>> +static int palmas_gpadc_start_conversion(struct palmas_gpadc *adc, int adc_chan)
>> +{
>> + unsigned int val;
>> + int ret;
>> +
>> + init_completion(&adc->conv_completion);
>> + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_SW_SELECT,
>> + PALMAS_GPADC_SW_SELECT_SW_START_CONV0,
>> + PALMAS_GPADC_SW_SELECT_SW_START_CONV0);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "ADC_SW_START write failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = wait_for_completion_timeout(&adc->conv_completion,
>> + ADC_CONVERSION_TIMEOUT);
>> + if (ret == 0) {
>> + dev_err(adc->dev, "ADC conversion not completed\n");
>> + ret = -ETIMEDOUT;
>> + return ret;
> return -ETIMEDOUT; Might be worth you setting up to do sparse, smatch and
> coccicheck runs on the code as they'll pick up on a lot of issues like this.
>
>> + }
>> +
>> + ret = palmas_bulk_read(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_SW_CONV0_LSB, &val, 2);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "ADCDATA read failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = (val & 0xFFF);
> nitpick : blank line here.
>> + return ret;
>> +}
>> +
>> +static int palmas_gpadc_get_calibrated_code(struct palmas_gpadc *adc,
>> + int adc_chan, int val)
>> +{
>> + if (((val*1000) - adc->adc_info[adc_chan].offset) < 0) {
>> + dev_err(adc->dev, "No Input Connected\n");
>> + return 0;
>> + }
> Interesting, but should this not be caught for raw channel reads as well?
>> +
> Umm. what is is_correct_code? Should be documented somewhere
>> + if (!(adc->adc_info[adc_chan].is_correct_code))
>> + val = ((val*1000) - adc->adc_info[adc_chan].offset) /
>> + adc->adc_info[adc_chan].gain_error;
>> +
>> + val = (val * adc->adc_info[adc_chan].gain) / 1000;
>> + return val;
>> +}
>> +
>> +static int palmas_gpadc_read_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan, int *val, int *val2, long mask)
>> +{
>> + struct palmas_gpadc *adc = iio_priv(indio_dev);
>> + int adc_chan = chan->channel;
>> + int ret = 0;
>> +
>> + if (adc_chan > PALMAS_ADC_CH_MAX)
>> = given I think your channels are 0 indexed?
>> + return -EINVAL;
>> +
>> + mutex_lock(&indio_dev->mlock);
>> +
>> + switch (mask) {
>> + case IIO_CHAN_INFO_RAW:
>> + case IIO_CHAN_INFO_PROCESSED:
> I'd be tempted to split the two code paths here as that will be slightly
> easier to read (if longer).
>
> I'm also highly suspicious of any driver that does processed output
> and has a return type of IIO_VAL_INT. Are you processed values in the
> units documented in Documentation/ABI/testing/sysfs-bus-iio?
> They could be, but I would like a comment saying that.
>
>> + ret = palmas_gpadc_read_prepare(adc, adc_chan);
>> + if (ret < 0)
>> + goto out;
>> +
>> + ret = palmas_gpadc_start_conversion(adc, adc_chan);
>> + if (ret < 0) {
>> + dev_err(adc->dev,
>> + "ADC start coversion failed\n");
>> + goto out;
>> + }
>> +
>> + if (mask == IIO_CHAN_INFO_PROCESSED)
>> + ret = palmas_gpadc_get_calibrated_code(
>> + adc, adc_chan, ret);
>> +
>> + *val = ret;
>> +
>> + ret = IIO_VAL_INT;
>> + goto out;
>> + }
>> +
>> + mutex_unlock(&indio_dev->mlock);
>> + return ret;
>> +
>> +out:
>> + palmas_gpadc_read_done(adc, adc_chan);
>> + mutex_unlock(&indio_dev->mlock);
>> + return ret;
>> +}
>> +
>> +static const struct iio_info palmas_gpadc_iio_info = {
>> + .read_raw = palmas_gpadc_read_raw,
>> + .driver_module = THIS_MODULE,
>> +};
>> +
>> +#define PALMAS_ADC_CHAN_IIO(chan, _type) \
>> +{ \
>> + .datasheet_name = PALMAS_DATASHEET_NAME(chan), \
>> + .type = _type, \
> Right now they are all voltage channels, why have that specifiable in this
> macro?
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
>> + BIT(IIO_CHAN_INFO_PROCESSED), \
> Hmm. This is very very rarely justified. Either the driver has
> nice linear relationship between the raw value and the processed one, in which
> case you should be providing *_RAW, *_OFFSET and *_SCALE and leaving the maths
> to userspace (or the in kernel wrappers), or they are non linear in which case
> only the processed value is of interest and the raw one not directly so.
> (the only exception to this is light sensors where the processed channel
> is often a computed channel from several input _raw readings).
>
>> + .indexed = 1, \
>> + .channel = PALMAS_ADC_CH_##chan, \
> Given this maps back to the value of chan, just put that in as a number
> and loose the enum. Channel is used in the naming so it doesn't
> make sense to obscure that behind an enum anyway.
>> +}
>> +
>> +static const struct iio_chan_spec palmas_gpadc_iio_channel[] = {
>> + PALMAS_ADC_CHAN_IIO(IN0, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN1, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN2, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN3, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN4, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN5, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN6, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN7, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN8, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN9, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN10, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN11, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN12, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN13, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN14, IIO_VOLTAGE),
>> + PALMAS_ADC_CHAN_IIO(IN15, IIO_VOLTAGE),
>> +};
>> +
>> +static int palmas_gpadc_probe(struct platform_device *pdev)
>> +{
>> + struct palmas_gpadc *adc;
>> + struct palmas_platform_data *pdata;
>> + struct palmas_gpadc_platform_data *adc_pdata;
>> + struct iio_dev *iodev;
>> + int ret, i;
>> +
>> + pdata = dev_get_platdata(pdev->dev.parent);
>> + if (!pdata || !pdata->gpadc_pdata) {
>> + dev_err(&pdev->dev, "No platform data\n");
>> + return -ENODEV;
>> + }
>> + adc_pdata = pdata->gpadc_pdata;
>> +
>> + iodev = iio_device_alloc(sizeof(*adc));
>> + if (!iodev) {
>> + dev_err(&pdev->dev, "iio_device_alloc failed\n");
>> + return -ENOMEM;
>> + }
>> +
>> + if (adc_pdata->iio_maps) {
>> + ret = iio_map_array_register(iodev, adc_pdata->iio_maps);
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "iio_map_array_register failed\n");
>> + goto out;
>> + }
>> + }
>> +
>> + adc = iio_priv(iodev);
>> + adc->dev = &pdev->dev;
>> + adc->palmas = dev_get_drvdata(pdev->dev.parent);
>> + adc->adc_info = palmas_gpadc_info;
>> + init_completion(&adc->conv_completion);
>> + dev_set_drvdata(&pdev->dev, iodev);
>> +
>> + adc->auto_conversion_period = adc_pdata->auto_conversion_period_ms;
>> + adc->irq = palmas_irq_get_virq(adc->palmas, PALMAS_GPADC_EOC_SW_IRQ);
>> + ret = request_threaded_irq(adc->irq, NULL,
>> + palmas_gpadc_irq,
>> + IRQF_ONESHOT | IRQF_EARLY_RESUME, dev_name(adc->dev),
>> + adc);
>> + if (ret < 0) {
>> + dev_err(adc->dev,
>> + "request irq %d failed: %dn", adc->irq, ret);
>> + goto out_unregister_map;
>> + }
>> +
>> + if (adc_pdata->adc_wakeup1_data) {
>> + memcpy(&adc->wakeup1_data, adc_pdata->adc_wakeup1_data,
>> + sizeof(adc->wakeup1_data));
>> + adc->wakeup1_enable = true;
>> + adc->irq_auto_0 = platform_get_irq(pdev, 1);
>> + ret = request_threaded_irq(adc->irq_auto_0, NULL,
>> + palmas_gpadc_irq_auto,
>> + IRQF_ONESHOT | IRQF_EARLY_RESUME,
>> + "palmas-adc-auto-0", adc);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "request auto0 irq %d failed: %dn",
>> + adc->irq_auto_0, ret);
>> + goto out_irq_free;
>> + }
>> + }
>> +
>> + if (adc_pdata->adc_wakeup2_data) {
>> + memcpy(&adc->wakeup2_data, adc_pdata->adc_wakeup2_data,
>> + sizeof(adc->wakeup2_data));
>> + adc->wakeup2_enable = true;
>> + adc->irq_auto_1 = platform_get_irq(pdev, 2);
>> + ret = request_threaded_irq(adc->irq_auto_1, NULL,
>> + palmas_gpadc_irq_auto,
>> + IRQF_ONESHOT | IRQF_EARLY_RESUME,
>> + "palmas-adc-auto-1", adc);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "request auto1 irq %d failed: %dn",
>> + adc->irq_auto_1, ret);
>> + goto out_irq_auto0_free;
>> + }
>> + }
>> +
> I've requested kernel-doc above for ch0_current, but if that doesn't
> make it clear what matic is going on here then some comments here
> would be good.
>> + if (adc_pdata->ch0_current == 0)
>> + adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_0;
>> + else if (adc_pdata->ch0_current <= 5)
>> + adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_5;
>> + else if (adc_pdata->ch0_current <= 15)
>> + adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_15;
>> + else
>> + adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_20;
>> +
>> + if (adc_pdata->ch3_current == 0)
>> + adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_0;
>> + else if (adc_pdata->ch3_current <= 10)
>> + adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_10;
>> + else if (adc_pdata->ch3_current <= 400)
>> + adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_400;
>> + else
>> + adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_800;
>> +
>> + adc->extended_delay = adc_pdata->extended_delay;
>> +
>> + iodev->name = MOD_NAME;
>> + iodev->dev.parent = &pdev->dev;
>> + iodev->info = &palmas_gpadc_iio_info;
>> + iodev->modes = INDIO_DIRECT_MODE;
>> + iodev->channels = palmas_gpadc_iio_channel;
>> + iodev->num_channels = ARRAY_SIZE(palmas_gpadc_iio_channel);
>> +
>> + ret = iio_device_register(iodev);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "iio_device_register() failed: %d\n", ret);
>> + goto out_irq_auto1_free;
>> + }
>> +
>> + device_set_wakeup_capable(&pdev->dev, 1);
>> + for (i = 0; i < PALMAS_ADC_CH_MAX; i++) {
>> + if (!(adc->adc_info[i].is_correct_code))
>> + palmas_gpadc_calibrate(adc, i);
>> + }
>> +
>> + if (adc->wakeup1_enable || adc->wakeup2_enable)
>> + device_wakeup_enable(&pdev->dev);
> There is no match for this in the remove... Should there be one?
> (not an interface I know anything about!)
>> +
>> + return 0;
>> +
>> +out_irq_auto1_free:
>> + if (adc_pdata->adc_wakeup2_data)
>> + free_irq(adc->irq_auto_1, adc);
>> +out_irq_auto0_free:
>> + if (adc_pdata->adc_wakeup1_data)
>> + free_irq(adc->irq_auto_0, adc);
>> +out_irq_free:
>> + free_irq(adc->irq, adc);
>> +out_unregister_map:
>> + if (adc_pdata->iio_maps)
>> + iio_map_array_unregister(iodev);
>> +out:
>> + iio_device_free(iodev);
>> + return ret;
>> +}
>> +
>> +static int palmas_gpadc_remove(struct platform_device *pdev)
>> +{
>> + struct iio_dev *iodev = dev_to_iio_dev(&pdev->dev);
>> + struct palmas_gpadc *adc = iio_priv(iodev);
>> + struct palmas_platform_data *pdata = dev_get_platdata(pdev->dev.parent);
>> +
>> + if (pdata->gpadc_pdata->iio_maps)
>> + iio_map_array_unregister(iodev);
>> + iio_device_unregister(iodev);
>> + free_irq(adc->irq, adc);
>> + if (adc->wakeup1_enable)
>> + free_irq(adc->irq_auto_0, adc);
>> + if (adc->wakeup2_enable)
>> + free_irq(adc->irq_auto_1, adc);
>> + iio_device_free(iodev);
> Could use demv_iio_device_alloc and not need the free here or on error path.
> Given location of irq frees you could do devm allocations of them as well
> which would cut out a fair bit of code without reordering anything.
>
> nit: blank line here.
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc)
>> +{
>> + int adc_period, conv;
>> + int i;
>> + int ch0 = 0, ch1 = 0;
>> + int thres;
>> + int ret;
>> +
>> + adc_period = adc->auto_conversion_period;
>> + for (i = 0; i < 16; ++i) {
> spacing around the /
>> + if (((1000 * (1 << i))/32) < adc_period)
>> + continue;
>> + }
>> + if (i > 0)
>> + i--;
>> + adc_period = i;
>> + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_AUTO_CTRL,
>> + PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK,
>> + adc_period);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "AUTO_CTRL write failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + conv = 0;
>> + if (adc->wakeup1_enable) {
>> + int is_high;
>> +
>> + ch0 = adc->wakeup1_data.adc_channel_number;
>> + conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN;
>> + if (adc->wakeup1_data.adc_high_threshold > 0) {
>> + thres = adc->wakeup1_data.adc_high_threshold;
>> + is_high = 0;
>> + } else {
>> + thres = adc->wakeup1_data.adc_low_threshold;
>> + is_high = BIT(7);
> BIT(7) is a bit random, so I'd suggest defining an appropriate macro
> for it this register field.
>
>> + }
>> +
>> + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_THRES_CONV0_LSB, thres & 0xFF);
>> + if (ret < 0) {
>> + dev_err(adc->dev,
>> + "THRES_CONV0_LSB write failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_THRES_CONV0_MSB,
>> + ((thres >> 8) & 0xF) | is_high);
>> + if (ret < 0) {
>> + dev_err(adc->dev,
>> + "THRES_CONV0_MSB write failed: %d\n", ret);
>> + return ret;
>> + }
>> + }
>> +
>> + if (adc->wakeup2_enable) {
>> + int is_high;
>> +
>> + ch1 = adc->wakeup2_data.adc_channel_number;
>> + conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN;
>> + if (adc->wakeup2_data.adc_high_threshold > 0) {
>> + thres = adc->wakeup2_data.adc_high_threshold;
>> + is_high = 0;
>> + } else {
>> + thres = adc->wakeup2_data.adc_low_threshold;
>> + is_high = BIT(7);
>> + }
>> +
>> + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_THRES_CONV1_LSB, thres & 0xFF);
>> + if (ret < 0) {
>> + dev_err(adc->dev,
>> + "THRES_CONV1_LSB write failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_THRES_CONV1_MSB,
>> + ((thres >> 8) & 0xF) | is_high);
>> + if (ret < 0) {
>> + dev_err(adc->dev,
>> + "THRES_CONV1_MSB write failed: %d\n", ret);
>> + return ret;
>> + }
>> + }
>> +
>> + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_AUTO_SELECT, (ch1 << 4) | ch0);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "AUTO_SELECT write failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_AUTO_CTRL,
>> + PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN |
>> + PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN, conv);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "AUTO_CTRL write failed: %d\n", ret);
>> + return ret;
>> + }
> nitpick. Blank line here please.
>> + return 0;
>> +}
>> +
>> +static int palmas_adc_wakeup_reset(struct palmas_gpadc *adc)
>> +{
>> + int ret;
>> +
>> + ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>> + PALMAS_GPADC_AUTO_SELECT, 0);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "AUTO_SELECT write failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = palmas_disable_auto_conversion(adc);
>> + if (ret < 0) {
>> + dev_err(adc->dev, "Disable auto conversion failed: %d\n", ret);
>> + return ret;
>> + }
>> + return 0;
>> +}
>> +
>> +static int palmas_gpadc_suspend(struct device *dev)
>> +{
>> + struct iio_dev *iodev = dev_to_iio_dev(dev);
>> + struct palmas_gpadc *adc = iio_priv(iodev);
>> + int wakeup = adc->wakeup1_enable || adc->wakeup2_enable;
>> + int ret;
>> +
>> + if (!device_may_wakeup(dev) || !wakeup)
>> + return 0;
>> +
>> + ret = palmas_adc_wakeup_configure(adc);
>> + if (ret < 0)
>> + return ret;
>> +
>> + if (adc->wakeup1_enable)
>> + enable_irq_wake(adc->irq_auto_0);
>> +
>> + if (adc->wakeup2_enable)
>> + enable_irq_wake(adc->irq_auto_1);
> nitpick. Blank line here please.
>> + return 0;
>> +}
>> +
>> +static int palmas_gpadc_resume(struct device *dev)
>> +{
>> + struct iio_dev *iodev = dev_to_iio_dev(dev);
>> + struct palmas_gpadc *adc = iio_priv(iodev);
>> + int wakeup = adc->wakeup1_enable || adc->wakeup2_enable;
>> + int ret;
>> +
>> + if (!device_may_wakeup(dev) || !wakeup)
>> + return 0;
>> +
>> + ret = palmas_adc_wakeup_reset(adc);
>> + if (ret < 0)
>> + return ret;
>> +
>> + if (adc->wakeup1_enable)
>> + disable_irq_wake(adc->irq_auto_0);
>> +
>> + if (adc->wakeup2_enable)
>> + disable_irq_wake(adc->irq_auto_1);
>> +
>> + return 0;
>> +};
>> +#endif
>> +
>> +static const struct dev_pm_ops palmas_pm_ops = {
>> + SET_SYSTEM_SLEEP_PM_OPS(palmas_gpadc_suspend,
>> + palmas_gpadc_resume)
>> +};
>> +
>> +static struct platform_driver palmas_gpadc_driver = {
>> + .probe = palmas_gpadc_probe,
>> + .remove = palmas_gpadc_remove,
>> + .driver = {
>> + .name = MOD_NAME,
>> + .owner = THIS_MODULE,
>> + .pm = &palmas_pm_ops,
>> + },
>> +};
>> +
>> +static int __init palmas_gpadc_init(void)
>> +{
>> + return platform_driver_register(&palmas_gpadc_driver);
>> +}
>> +module_init(palmas_gpadc_init);
>> +
>> +static void __exit palmas_gpadc_exit(void)
>> +{
>> + platform_driver_unregister(&palmas_gpadc_driver);
>> +}
>> +module_exit(palmas_gpadc_exit);
>> +
>> +MODULE_DESCRIPTION("palmas GPADC driver");
>> +MODULE_AUTHOR("Pradeep Goudagunta<pgoudagunta@nvidia.com>");
>> +MODULE_ALIAS("platform:palmas-gpadc");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
>> index bb270bd..60acfa2 100644
>> --- a/include/linux/mfd/palmas.h
>> +++ b/include/linux/mfd/palmas.h
>> @@ -133,21 +133,32 @@ struct palmas_pmic_driver_data {
>> struct regulator_config config);
>> };
>>
>> +struct palmas_adc_wakeup_property {
>> + int adc_channel_number;
>> + int adc_high_threshold;
>> + int adc_low_threshold;
>> +};
>> +
>> struct palmas_gpadc_platform_data {
>> /* Channel 3 current source is only enabled during conversion */
>> int ch3_current;
>> -
>> /* Channel 0 current source can be used for battery detection.
>> - * If used for battery detection this will cause a permanent current
>> + * If used for battery detection this will cause a permanent current
>> * consumption depending on current level set here.
>> - */
>> + */
> Some oddness occured here in patch creation. Do check your own patches
> as we all end up with stuff like this from time to time that should
> be picked up on beofre sending out. It just adds noise.
>> int ch0_current;
>> + bool extended_delay;
>>
>> /* default BAT_REMOVAL_DAT setting on device probe */
>> int bat_removal;
>>
>> /* Sets the START_POLARITY bit in the RT_CTRL register */
>> int start_polarity;
>> +
>> + struct iio_map *iio_maps;
>> + int auto_conversion_period_ms;
>> + struct palmas_adc_wakeup_property *adc_wakeup1_data;
>> + struct palmas_adc_wakeup_property *adc_wakeup2_data;
>> };
>>
>> struct palmas_reg_init {
>> @@ -403,7 +414,7 @@ struct palmas_gpadc_calibration {
>> s32 gain_error;
>> s32 offset_error;
>> };
>> -
>> +/*
>> struct palmas_gpadc {
>> struct device *dev;
>> struct palmas *palmas;
>> @@ -426,6 +437,9 @@ struct palmas_gpadc {
>> int conv1_channel;
>> int rt_channel;
>> };
>> +*/
> So there's a commented out bit of code in this patch? Sort
> that out before the next version.
>
>> +
>> +#define PALMAS_DATASHEET_NAME(_name) "palmas-gpadc-chan-"#_name
>>
>> struct palmas_gpadc_result {
>> s32 raw_code;
>> @@ -519,6 +533,42 @@ enum palmas_irqs {
>> PALMAS_NUM_IRQ,
>> };
>>
>> +/* Palma GPADC Channels */
>> +enum {
>> + PALMAS_ADC_CH_IN0,
>> + PALMAS_ADC_CH_IN1,
>> + PALMAS_ADC_CH_IN2,
>> + PALMAS_ADC_CH_IN3,
>> + PALMAS_ADC_CH_IN4,
>> + PALMAS_ADC_CH_IN5,
>> + PALMAS_ADC_CH_IN6,
>> + PALMAS_ADC_CH_IN7,
>> + PALMAS_ADC_CH_IN8,
>> + PALMAS_ADC_CH_IN9,
>> + PALMAS_ADC_CH_IN10,
>> + PALMAS_ADC_CH_IN11,
>> + PALMAS_ADC_CH_IN12,
>> + PALMAS_ADC_CH_IN13,
>> + PALMAS_ADC_CH_IN14,
>> + PALMAS_ADC_CH_IN15,
> This does rather feel like an enum that doesn't add anything
> as the enum values = the index given at the end anyway...
>> + PALMAS_ADC_CH_MAX,
>> +};
>> +
>> +/* Palma GPADC Channel0 Current Source */
>> +enum {
>> + PALMAS_ADC_CH0_CURRENT_SRC_0,
>> + PALMAS_ADC_CH0_CURRENT_SRC_5,
>> + PALMAS_ADC_CH0_CURRENT_SRC_15,
>> + PALMAS_ADC_CH0_CURRENT_SRC_20,
>> +};
> Nitpick: new line here.
>> +/* Palma GPADC Channel3 Current Source */
>> +enum {
>> + PALMAS_ADC_CH3_CURRENT_SRC_0,
>> + PALMAS_ADC_CH3_CURRENT_SRC_10,
>> + PALMAS_ADC_CH3_CURRENT_SRC_400,
>> + PALMAS_ADC_CH3_CURRENT_SRC_800,
>> +};
>> +
>> struct palmas_pmic {
>> struct palmas *palmas;
>> struct device *dev;
>> @@ -2999,6 +3049,7 @@ enum usb_irq_events {
>> #define PALMAS_GPADC_TRIM14 0x0D
>> #define PALMAS_GPADC_TRIM15 0x0E
>> #define PALMAS_GPADC_TRIM16 0x0F
>> +#define PALMAS_GPADC_TRIMINVALID -1
>>
>> /* TPS659038 regen2_ctrl offset iss different from palmas */
>> #define TPS659038_REGEN2_CTRL 0x12
>>
>



\
 
 \ /
  Last update: 2015-09-28 23:21    [W:0.102 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site