lkml.org 
[lkml]   [2015]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [alsa-devel] [PATCH] ASoC: sgtl5000: fix bad register MIC_BIAS_VOLTAGE setup on probe
From
On Fri, Sep 25, 2015 at 1:50 PM, Mark Brown <broonie@kernel.org> wrote:
> On Fri, Sep 25, 2015 at 04:21:27PM +0200, Gianluca Renzi wrote:
>
>> snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
>> SGTL5000_BIAS_R_MASK,
>> - sgtl5000->micbias_voltage << SGTL5000_BIAS_R_SHIFT);
>> + sgtl5000->micbias_voltage << SGTL5000_BIAS_VOLT_SHIFT);
>
> That doesn't look right... I would expect _BIAS_R_SHIFT to shift a
> value into the register masked off by _BIAS_R_MASK and therefore that
> the above is saying that the definition of one of those two macros is
> wrong. I would not expect something called _BIAS_VOLT_SHIFT here.

Yes, the correct fix should be:

--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1376,8 +1376,8 @@ static int sgtl5000_probe(struct snd_soc_codec *codec)
sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);

snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
- SGTL5000_BIAS_R_MASK,
- sgtl5000->micbias_voltage << SGTL5000_BIAS_R_SHIFT);
+ SGTL5000_BIAS_VOLT_MASK,
+ sgtl5000->micbias_voltage << SGTL5000_BIAS_VOLT_SHIFT);
/*
* disable DAP
* TODO:
Gianluca,

Care to send a v2 of the patch?

Regards,

Fabio Estevam


\
 
 \ /
  Last update: 2015-09-25 19:21    [W:0.041 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site