lkml.org 
[lkml]   [2015]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] radeonfb: Deinline large functions
Date
With this .config: http://busybox.net/~vda/kernel_config,
after uninlining these functions have sizes and callsite counts
as follows:

__OUTPLLP: 61 bytes, 12 callsites
__INPLL: 79 bytes, 150 callsites
__OUTPLL: 82 bytes, 138 callsites
_OUTREGP: 101 bytes, 8 callsites
_radeon_msleep: 66 bytes, 18 callsites
_radeon_fifo_wait: 83 bytes, 24 callsites
_radeon_engine_idle: 92 bytes, 10 callsites
radeon_engine_flush: 105 bytes, 2 callsites
radeon_pll_errata_after_index_slow: 31 bytes, 11 callsites
radeon_pll_errata_after_data_slow: 91 bytes, 9 callsites

radeon_pll_errata_after_FOO functions are split into two parts:
the inlined part which checks corresponding rinfo->errata bit,
and out-of-line part which performs workaround magic per se.

Reduction in code size is about 49,500 bytes:

text data bss dec hex filename
85789648 22294616 20627456 128711720 7abfc28 vmlinux.before
85740176 22294680 20627456 128662312 7ab3b28 vmlinux

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
---

Resending. Ben, please let me know if you aren't the right person for this.

drivers/video/fbdev/aty/radeon_base.c | 133 ++++++++++++++++++++++++++++++-
drivers/video/fbdev/aty/radeonfb.h | 144 ++++------------------------------
2 files changed, 146 insertions(+), 131 deletions(-)

diff --git a/drivers/video/fbdev/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
index 26d80a4..bd9b6ca 100644
--- a/drivers/video/fbdev/aty/radeon_base.c
+++ b/drivers/video/fbdev/aty/radeon_base.c
@@ -282,9 +282,138 @@ static int backlight = 1;
static int backlight = 0;
#endif

-/*
- * prototypes
+/* Note about this function: we have some rare cases where we must not schedule,
+ * this typically happen with our special "wake up early" hook which allows us to
+ * wake up the graphic chip (and thus get the console back) before everything else
+ * on some machines that support that mechanism. At this point, interrupts are off
+ * and scheduling is not permitted
*/
+void _radeon_msleep(struct radeonfb_info *rinfo, unsigned long ms)
+{
+ if (rinfo->no_schedule || oops_in_progress)
+ mdelay(ms);
+ else
+ msleep(ms);
+}
+
+void radeon_pll_errata_after_index_slow(struct radeonfb_info *rinfo)
+{
+ /* Called if (rinfo->errata & CHIP_ERRATA_PLL_DUMMYREADS) is set */
+ (void)INREG(CLOCK_CNTL_DATA);
+ (void)INREG(CRTC_GEN_CNTL);
+}
+
+void radeon_pll_errata_after_data_slow(struct radeonfb_info *rinfo)
+{
+ if (rinfo->errata & CHIP_ERRATA_PLL_DELAY) {
+ /* we can't deal with posted writes here ... */
+ _radeon_msleep(rinfo, 5);
+ }
+ if (rinfo->errata & CHIP_ERRATA_R300_CG) {
+ u32 save, tmp;
+ save = INREG(CLOCK_CNTL_INDEX);
+ tmp = save & ~(0x3f | PLL_WR_EN);
+ OUTREG(CLOCK_CNTL_INDEX, tmp);
+ tmp = INREG(CLOCK_CNTL_DATA);
+ OUTREG(CLOCK_CNTL_INDEX, save);
+ }
+}
+
+void _OUTREGP(struct radeonfb_info *rinfo, u32 addr, u32 val, u32 mask)
+{
+ unsigned long flags;
+ unsigned int tmp;
+
+ spin_lock_irqsave(&rinfo->reg_lock, flags);
+ tmp = INREG(addr);
+ tmp &= (mask);
+ tmp |= (val);
+ OUTREG(addr, tmp);
+ spin_unlock_irqrestore(&rinfo->reg_lock, flags);
+}
+
+u32 __INPLL(struct radeonfb_info *rinfo, u32 addr)
+{
+ u32 data;
+
+ OUTREG8(CLOCK_CNTL_INDEX, addr & 0x0000003f);
+ radeon_pll_errata_after_index(rinfo);
+ data = INREG(CLOCK_CNTL_DATA);
+ radeon_pll_errata_after_data(rinfo);
+ return data;
+}
+
+void __OUTPLL(struct radeonfb_info *rinfo, unsigned int index, u32 val)
+{
+ OUTREG8(CLOCK_CNTL_INDEX, (index & 0x0000003f) | 0x00000080);
+ radeon_pll_errata_after_index(rinfo);
+ OUTREG(CLOCK_CNTL_DATA, val);
+ radeon_pll_errata_after_data(rinfo);
+}
+
+void __OUTPLLP(struct radeonfb_info *rinfo, unsigned int index,
+ u32 val, u32 mask)
+{
+ unsigned int tmp;
+
+ tmp = __INPLL(rinfo, index);
+ tmp &= (mask);
+ tmp |= (val);
+ __OUTPLL(rinfo, index, tmp);
+}
+
+void _radeon_fifo_wait(struct radeonfb_info *rinfo, int entries)
+{
+ int i;
+
+ for (i=0; i<2000000; i++) {
+ if ((INREG(RBBM_STATUS) & 0x7f) >= entries)
+ return;
+ udelay(1);
+ }
+ printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
+}
+
+void radeon_engine_flush(struct radeonfb_info *rinfo)
+{
+ int i;
+
+ /* Initiate flush */
+ OUTREGP(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL,
+ ~RB2D_DC_FLUSH_ALL);
+
+ /* Ensure FIFO is empty, ie, make sure the flush commands
+ * has reached the cache
+ */
+ _radeon_fifo_wait(rinfo, 64);
+
+ /* Wait for the flush to complete */
+ for (i=0; i < 2000000; i++) {
+ if (!(INREG(DSTCACHE_CTLSTAT) & RB2D_DC_BUSY))
+ return;
+ udelay(1);
+ }
+ printk(KERN_ERR "radeonfb: Flush Timeout !\n");
+}
+
+void _radeon_engine_idle(struct radeonfb_info *rinfo)
+{
+ int i;
+
+ /* ensure FIFO is empty before waiting for idle */
+ _radeon_fifo_wait(rinfo, 64);
+
+ for (i=0; i<2000000; i++) {
+ if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) {
+ radeon_engine_flush(rinfo);
+ return;
+ }
+ udelay(1);
+ }
+ printk(KERN_ERR "radeonfb: Idle Timeout !\n");
+}
+
+

static void radeon_unmap_ROM(struct radeonfb_info *rinfo, struct pci_dev *dev)
{
diff --git a/drivers/video/fbdev/aty/radeonfb.h b/drivers/video/fbdev/aty/radeonfb.h
index cb84604..85b80cd 100644
--- a/drivers/video/fbdev/aty/radeonfb.h
+++ b/drivers/video/fbdev/aty/radeonfb.h
@@ -370,20 +370,7 @@ struct radeonfb_info {
* IO macros
*/

-/* Note about this function: we have some rare cases where we must not schedule,
- * this typically happen with our special "wake up early" hook which allows us to
- * wake up the graphic chip (and thus get the console back) before everything else
- * on some machines that support that mechanism. At this point, interrupts are off
- * and scheduling is not permitted
- */
-static inline void _radeon_msleep(struct radeonfb_info *rinfo, unsigned long ms)
-{
- if (rinfo->no_schedule || oops_in_progress)
- mdelay(ms);
- else
- msleep(ms);
-}
-
+void _radeon_msleep(struct radeonfb_info *rinfo, unsigned long ms);

#define INREG8(addr) readb((rinfo->mmio_base)+addr)
#define OUTREG8(addr,val) writeb(val, (rinfo->mmio_base)+addr)
@@ -392,19 +379,7 @@ static inline void _radeon_msleep(struct radeonfb_info *rinfo, unsigned long ms)
#define INREG(addr) readl((rinfo->mmio_base)+addr)
#define OUTREG(addr,val) writel(val, (rinfo->mmio_base)+addr)

-static inline void _OUTREGP(struct radeonfb_info *rinfo, u32 addr,
- u32 val, u32 mask)
-{
- unsigned long flags;
- unsigned int tmp;
-
- spin_lock_irqsave(&rinfo->reg_lock, flags);
- tmp = INREG(addr);
- tmp &= (mask);
- tmp |= (val);
- OUTREG(addr, tmp);
- spin_unlock_irqrestore(&rinfo->reg_lock, flags);
-}
+void _OUTREGP(struct radeonfb_info *rinfo, u32 addr, u32 val, u32 mask);

#define OUTREGP(addr,val,mask) _OUTREGP(rinfo, addr, val,mask)

@@ -425,64 +400,24 @@ static inline void _OUTREGP(struct radeonfb_info *rinfo, u32 addr,
* possible exception to this rule is the call to unblank(), which may
* be done at irq time if an oops is in progress.
*/
+void radeon_pll_errata_after_index_slow(struct radeonfb_info *rinfo);
static inline void radeon_pll_errata_after_index(struct radeonfb_info *rinfo)
{
- if (!(rinfo->errata & CHIP_ERRATA_PLL_DUMMYREADS))
- return;
-
- (void)INREG(CLOCK_CNTL_DATA);
- (void)INREG(CRTC_GEN_CNTL);
+ if (rinfo->errata & CHIP_ERRATA_PLL_DUMMYREADS)
+ radeon_pll_errata_after_index_slow(rinfo);
}

+void radeon_pll_errata_after_data_slow(struct radeonfb_info *rinfo);
static inline void radeon_pll_errata_after_data(struct radeonfb_info *rinfo)
{
- if (rinfo->errata & CHIP_ERRATA_PLL_DELAY) {
- /* we can't deal with posted writes here ... */
- _radeon_msleep(rinfo, 5);
- }
- if (rinfo->errata & CHIP_ERRATA_R300_CG) {
- u32 save, tmp;
- save = INREG(CLOCK_CNTL_INDEX);
- tmp = save & ~(0x3f | PLL_WR_EN);
- OUTREG(CLOCK_CNTL_INDEX, tmp);
- tmp = INREG(CLOCK_CNTL_DATA);
- OUTREG(CLOCK_CNTL_INDEX, save);
- }
-}
-
-static inline u32 __INPLL(struct radeonfb_info *rinfo, u32 addr)
-{
- u32 data;
-
- OUTREG8(CLOCK_CNTL_INDEX, addr & 0x0000003f);
- radeon_pll_errata_after_index(rinfo);
- data = INREG(CLOCK_CNTL_DATA);
- radeon_pll_errata_after_data(rinfo);
- return data;
-}
-
-static inline void __OUTPLL(struct radeonfb_info *rinfo, unsigned int index,
- u32 val)
-{
-
- OUTREG8(CLOCK_CNTL_INDEX, (index & 0x0000003f) | 0x00000080);
- radeon_pll_errata_after_index(rinfo);
- OUTREG(CLOCK_CNTL_DATA, val);
- radeon_pll_errata_after_data(rinfo);
-}
-
-
-static inline void __OUTPLLP(struct radeonfb_info *rinfo, unsigned int index,
- u32 val, u32 mask)
-{
- unsigned int tmp;
-
- tmp = __INPLL(rinfo, index);
- tmp &= (mask);
- tmp |= (val);
- __OUTPLL(rinfo, index, tmp);
+ if (rinfo->errata & (CHIP_ERRATA_PLL_DELAY|CHIP_ERRATA_R300_CG))
+ radeon_pll_errata_after_data_slow(rinfo);
}

+u32 __INPLL(struct radeonfb_info *rinfo, u32 addr);
+void __OUTPLL(struct radeonfb_info *rinfo, unsigned int index, u32 val);
+void __OUTPLLP(struct radeonfb_info *rinfo, unsigned int index,
+ u32 val, u32 mask);

#define INPLL(addr) __INPLL(rinfo, addr)
#define OUTPLL(index, val) __OUTPLL(rinfo, index, val)
@@ -532,58 +467,9 @@ static inline u32 radeon_get_dstbpp(u16 depth)
* 2D Engine helper routines
*/

-static inline void _radeon_fifo_wait(struct radeonfb_info *rinfo, int entries)
-{
- int i;
-
- for (i=0; i<2000000; i++) {
- if ((INREG(RBBM_STATUS) & 0x7f) >= entries)
- return;
- udelay(1);
- }
- printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
-}
-
-static inline void radeon_engine_flush (struct radeonfb_info *rinfo)
-{
- int i;
-
- /* Initiate flush */
- OUTREGP(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL,
- ~RB2D_DC_FLUSH_ALL);
-
- /* Ensure FIFO is empty, ie, make sure the flush commands
- * has reached the cache
- */
- _radeon_fifo_wait (rinfo, 64);
-
- /* Wait for the flush to complete */
- for (i=0; i < 2000000; i++) {
- if (!(INREG(DSTCACHE_CTLSTAT) & RB2D_DC_BUSY))
- return;
- udelay(1);
- }
- printk(KERN_ERR "radeonfb: Flush Timeout !\n");
-}
-
-
-static inline void _radeon_engine_idle(struct radeonfb_info *rinfo)
-{
- int i;
-
- /* ensure FIFO is empty before waiting for idle */
- _radeon_fifo_wait (rinfo, 64);
-
- for (i=0; i<2000000; i++) {
- if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) {
- radeon_engine_flush (rinfo);
- return;
- }
- udelay(1);
- }
- printk(KERN_ERR "radeonfb: Idle Timeout !\n");
-}
-
+void _radeon_fifo_wait(struct radeonfb_info *rinfo, int entries);
+void radeon_engine_flush(struct radeonfb_info *rinfo);
+void _radeon_engine_idle(struct radeonfb_info *rinfo);

#define radeon_engine_idle() _radeon_engine_idle(rinfo)
#define radeon_fifo_wait(entries) _radeon_fifo_wait(rinfo,entries)
--
1.8.1.4


\
 
 \ /
  Last update: 2015-09-23 20:21    [W:0.039 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site