lkml.org 
[lkml]   [2015]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/2] airo: fix IW_AUTH_ALG_OPEN_SYSTEM
From
Date
On Mon, 2015-09-21 at 15:44 +0200, Ondrej Zary wrote:
> IW_AUTH_ALG_OPEN_SYSTEM is ambiguous in set_auth for WEP as
> wpa_supplicant uses it for both no encryption and WEP open system.
> Cache the last mode set (only of these two) and use it here.
>
> This allows wpa_supplicant to work with unencrypted APs.

Looks OK to me.

Dan

> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
> ---
> drivers/net/wireless/airo.c | 59 +++++++++++++++++++++++++------------------
> 1 file changed, 35 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
> index d0c97c2..67001a8 100644
> --- a/drivers/net/wireless/airo.c
> +++ b/drivers/net/wireless/airo.c
> @@ -1237,6 +1237,7 @@ struct airo_info {
>
> int wep_capable;
> int max_wep_idx;
> + int last_auth;
>
> /* WPA-related stuff */
> unsigned int bssListFirst;
> @@ -3786,6 +3787,16 @@ badrx:
> }
> }
>
> +static inline void set_auth_type(struct airo_info *local, int auth_type)
> +{
> + local->config.authType = auth_type;
> + /* Cache the last auth type used (of AUTH_OPEN and AUTH_ENCRYPT).
> + * Used by airo_set_auth()
> + */
> + if (auth_type == AUTH_OPEN || auth_type == AUTH_ENCRYPT)
> + local->last_auth = auth_type;
> +}
> +
> static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
> {
> Cmd cmd;
> @@ -3862,7 +3873,7 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
> "level scale");
> }
> ai->config.opmode = adhoc ? MODE_STA_IBSS : MODE_STA_ESS;
> - ai->config.authType = AUTH_OPEN;
> + set_auth_type(ai, AUTH_OPEN);
> ai->config.modulation = MOD_CCK;
>
> if (le16_to_cpu(cap_rid.len) >= sizeof(cap_rid) &&
> @@ -4880,13 +4891,13 @@ static void proc_config_on_close(struct inode *inode, struct file *file)
> line += 5;
> switch( line[0] ) {
> case 's':
> - ai->config.authType = AUTH_SHAREDKEY;
> + set_auth_type(ai, AUTH_SHAREDKEY);
> break;
> case 'e':
> - ai->config.authType = AUTH_ENCRYPT;
> + set_auth_type(ai, AUTH_ENCRYPT);
> break;
> default:
> - ai->config.authType = AUTH_OPEN;
> + set_auth_type(ai, AUTH_OPEN);
> break;
> }
> set_bit (FLAG_COMMIT, &ai->flags);
> @@ -6368,9 +6379,8 @@ static int airo_set_encode(struct net_device *dev,
> * should be enabled (user may turn it off later)
> * This is also how "iwconfig ethX key on" works */
> if((index == current_index) && (key.len > 0) &&
> - (local->config.authType == AUTH_OPEN)) {
> - local->config.authType = AUTH_ENCRYPT;
> - }
> + (local->config.authType == AUTH_OPEN))
> + set_auth_type(local, AUTH_ENCRYPT);
> } else {
> /* Do we want to just set the transmit key index ? */
> int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
> @@ -6389,12 +6399,12 @@ static int airo_set_encode(struct net_device *dev,
> }
> }
> /* Read the flags */
> - if(dwrq->flags & IW_ENCODE_DISABLED)
> - local->config.authType = AUTH_OPEN; // disable encryption
> + if (dwrq->flags & IW_ENCODE_DISABLED)
> + set_auth_type(local, AUTH_OPEN); /* disable encryption */
> if(dwrq->flags & IW_ENCODE_RESTRICTED)
> - local->config.authType = AUTH_SHAREDKEY; // Only Both
> - if(dwrq->flags & IW_ENCODE_OPEN)
> - local->config.authType = AUTH_ENCRYPT; // Only Wep
> + set_auth_type(local, AUTH_SHAREDKEY); /* Only Both */
> + if (dwrq->flags & IW_ENCODE_OPEN)
> + set_auth_type(local, AUTH_ENCRYPT); /* Only Wep */
> /* Commit the changes to flags if needed */
> if (local->config.authType != currentAuthType)
> set_bit (FLAG_COMMIT, &local->flags);
> @@ -6549,12 +6559,12 @@ static int airo_set_encodeext(struct net_device *dev,
> }
>
> /* Read the flags */
> - if(encoding->flags & IW_ENCODE_DISABLED)
> - local->config.authType = AUTH_OPEN; // disable encryption
> + if (encoding->flags & IW_ENCODE_DISABLED)
> + set_auth_type(local, AUTH_OPEN); /* disable encryption */
> if(encoding->flags & IW_ENCODE_RESTRICTED)
> - local->config.authType = AUTH_SHAREDKEY; // Only Both
> - if(encoding->flags & IW_ENCODE_OPEN)
> - local->config.authType = AUTH_ENCRYPT; // Only Wep
> + set_auth_type(local, AUTH_SHAREDKEY); /* Only Both */
> + if (encoding->flags & IW_ENCODE_OPEN)
> + set_auth_type(local, AUTH_ENCRYPT);
> /* Commit the changes to flags if needed */
> if (local->config.authType != currentAuthType)
> set_bit (FLAG_COMMIT, &local->flags);
> @@ -6659,9 +6669,9 @@ static int airo_set_auth(struct net_device *dev,
> if (param->value) {
> /* Only change auth type if unencrypted */
> if (currentAuthType == AUTH_OPEN)
> - local->config.authType = AUTH_ENCRYPT;
> + set_auth_type(local, AUTH_ENCRYPT);
> } else {
> - local->config.authType = AUTH_OPEN;
> + set_auth_type(local, AUTH_OPEN);
> }
>
> /* Commit the changes to flags if needed */
> @@ -6670,13 +6680,14 @@ static int airo_set_auth(struct net_device *dev,
> break;
>
> case IW_AUTH_80211_AUTH_ALG: {
> - /* FIXME: What about AUTH_OPEN? This API seems to
> - * disallow setting our auth to AUTH_OPEN.
> - */
> if (param->value & IW_AUTH_ALG_SHARED_KEY) {
> - local->config.authType = AUTH_SHAREDKEY;
> + set_auth_type(local, AUTH_SHAREDKEY);
> } else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
> - local->config.authType = AUTH_ENCRYPT;
> + /* We don't know here if WEP open system or
> + * unencrypted mode was requested - so use the
> + * last mode (of these two) used last time
> + */
> + set_auth_type(local, local->last_auth);
> } else
> return -EINVAL;
>




\
 
 \ /
  Last update: 2015-09-21 18:41    [W:0.056 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site