lkml.org 
[lkml]   [2015]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] mfd: tps6105x: Fix NULL pointer access.
Date
When tps6105x used in TPS6105X_MODE_SHUTDOWN mode the driver calls
mfd_add_devices() with mfd_cell->name == NULL, that causes an ooops in
platform_device_register() later.

This patch adds an mfd_cell for each possible mode thereby excluding runtime
.name assignment.

Signed-off-by: Denis Grigoryev <grigoryev@fastwel.ru>
---
drivers/mfd/tps6105x.c | 62 ++++++++++++++++++++++++++++--------------------
1 file changed, 36 insertions(+), 26 deletions(-)

diff --git a/drivers/mfd/tps6105x.c b/drivers/mfd/tps6105x.c
index 5de95c2..4dbfb45 100644
--- a/drivers/mfd/tps6105x.c
+++ b/drivers/mfd/tps6105x.c
@@ -119,17 +119,25 @@ static int tps6105x_startup(struct tps6105x *tps6105x)
}

/*
- * MFD cells - we have one cell which is selected operation
- * mode, and we always have a GPIO cell.
- */
+ * * MFD cells - we always have a GPIO cell and we have one cell
+ * * which is selected operation mode.
+ * */
static struct mfd_cell tps6105x_cells[] = {
- {
- /* name will be runtime assigned */
- .id = -1,
+ [TPS6105X_REG0_MODE_SHUTDOWN] = {
+ .name = "tps6105x-gpio",
+ .id = -1,
+ },
+ [TPS6105X_REG0_MODE_TORCH] = {
+ .name = "tps6105x-leds",
+ .id = -1,
+ },
+ [TPS6105X_REG0_MODE_TORCH_FLASH] = {
+ .name = "tps6105x-flash",
+ .id = -1,
},
- {
- .name = "tps6105x-gpio",
- .id = -1,
+ [TPS6105X_REG0_MODE_VOLTAGE] = {
+ .name = "tps6105x-regulator",
+ .id = -1,
},
};

@@ -157,6 +165,18 @@ static int tps6105x_probe(struct i2c_client *client,
return ret;
}

+ /* Set up and register the platform devices. */
+ for (i = 0; i < ARRAY_SIZE(tps6105x_cells); i++) {
+ /* One state holder for all drivers, this is simple */
+ tps6105x_cells[i].platform_data = tps6105x;
+ tps6105x_cells[i].pdata_size = sizeof(*tps6105x);
+ }
+
+ ret = mfd_add_devices(&client->dev, -1, tps6105x_cells,
+ 1, NULL, 0, NULL);
+ if (ret)
+ return ret;
+
/* Remove warning texts when you implement new cell drivers */
switch (pdata->mode) {
case TPS6105X_MODE_SHUTDOWN:
@@ -164,31 +184,21 @@ static int tps6105x_probe(struct i2c_client *client,
"present, not used for anything, only GPIO\n");
break;
case TPS6105X_MODE_TORCH:
- tps6105x_cells[0].name = "tps6105x-leds";
- dev_warn(&client->dev,
- "torch mode is unsupported\n");
- break;
case TPS6105X_MODE_TORCH_FLASH:
- tps6105x_cells[0].name = "tps6105x-flash";
- dev_warn(&client->dev,
- "flash mode is unsupported\n");
- break;
case TPS6105X_MODE_VOLTAGE:
- tps6105x_cells[0].name ="tps6105x-regulator";
+ ret = mfd_add_devices(&client->dev, -1,
+ &tps6105x_cells[pdata->mode],
+ 1, NULL, 0, NULL);
break;
default:
+ dev_warn(&client->dev, "invalid mode: %d\n", pdata->mode);
break;
}

- /* Set up and register the platform devices. */
- for (i = 0; i < ARRAY_SIZE(tps6105x_cells); i++) {
- /* One state holder for all drivers, this is simple */
- tps6105x_cells[i].platform_data = tps6105x;
- tps6105x_cells[i].pdata_size = sizeof(*tps6105x);
- }
+ if (ret)
+ mfd_remove_devices(&client->dev);

- return mfd_add_devices(&client->dev, 0, tps6105x_cells,
- ARRAY_SIZE(tps6105x_cells), NULL, 0, NULL);
+ return ret;
}

static int tps6105x_remove(struct i2c_client *client)
--
1.7.10.4
\
 
 \ /
  Last update: 2015-09-21 16:01    [W:0.054 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site