lkml.org 
[lkml]   [2015]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mtd: nand: omap2: Rename shippable module to omap2_nand
On Fri, Aug 21, 2015 at 01:45:35PM +0300, Roger Quadros wrote:
> As both omap2 onenand and omap2 nand driver modules are
> named the same i.e. "omap2.ko", only one of them gets shipped
> during MODPOST if both are configured as loadable modules.
>
> To avoid this ambiguity let's ship the omap2 nand
> driver as "omap2_nand.ko"
>
> Reported by Pierre Neyron via github
> https://github.com/beagleboard/linux/issues/40
>
> Cc: Robert Nelson <robertcnelson@gmail.com>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/mtd/nand/Makefile | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 1f897ec..075a027 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -26,7 +26,8 @@ obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
> obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
> obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
> obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o
> -obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o
> +omap2_nand-objs := omap2.o
> +obj-$(CONFIG_MTD_NAND_OMAP2) += omap2_nand.o

Pushed to l2-mtd.git. I suppose this one should go out for 4.3, as
there's little downside to it, and it's kind of a bugfix.

Brian

> obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD) += omap_elm.o
> obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
> obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
> --
> 2.1.4
>


\
 
 \ /
  Last update: 2015-09-02 23:21    [W:0.056 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site