lkml.org 
[lkml]   [2015]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 4/9] usb: dwc3: core: Adapt to named interrupts
Date
From: Felipe Balbi <balbi@ti.com>

Add support to use interrupt names,

Following are the interrupt names

Peripheral Interrupt - peripheral
HOST Interrupt - host
OTG Interrupt - otg

[Roger Q]
- If any of these are missing we use the
first available IRQ resource so that we don't
break with older DTBs.

- Use gadget_irq in gadget driver.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/usb/dwc3/core.c | 12 ++++++++++++
drivers/usb/dwc3/core.h | 7 +++++++
drivers/usb/dwc3/gadget.c | 2 +-
3 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 2e36a9b..38b31df 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -958,6 +958,18 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->xhci_resources[1].flags = res->flags;
dwc->xhci_resources[1].name = res->name;

+ dwc->otg_irq = platform_get_irq_byname(pdev, "otg");
+ if (dwc->otg_irq < 0)
+ dwc->otg_irq = res->start;
+
+ dwc->gadget_irq = platform_get_irq_byname(pdev, "peripheral");
+ if (dwc->gadget_irq < 0)
+ dwc->gadget_irq = res->start;
+
+ dwc->xhci_irq = platform_get_irq_byname(pdev, "host");
+ if (dwc->xhci_irq < 0)
+ dwc->xhci_irq = res->start;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "missing memory resource\n");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 4b85330..bd32cb2 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -742,6 +742,9 @@ struct dwc3_scratchpad_array {
* @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
* @dr_mode: requested mode of operation
+ * @xhci_irq: IRQ number for XHCI IRQs
+ * @gadget_irq: IRQ number for Peripheral IRQs
+ * @otg_irq: IRQ number for OTG IRQs
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
@@ -847,6 +850,10 @@ struct dwc3 {

enum usb_dr_mode dr_mode;

+ int gadget_irq;
+ int xhci_irq;
+ int otg_irq;
+
/* used for suspend/resume */
u32 dcfg;
u32 gctl;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0c25704..1148ec8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1533,7 +1533,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
int irq;
u32 reg;

- irq = platform_get_irq(to_platform_device(dwc->dev), 0);
+ irq = dwc->gadget_irq;
ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
IRQF_SHARED, "dwc3", dwc);
if (ret) {
--
2.1.4


\
 
 \ /
  Last update: 2015-09-02 16:41    [W:0.419 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site