lkml.org 
[lkml]   [2015]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.2 110/120] ARM: rockchip: fix the CPU soft reset
Date
4.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Caesar Wang <wxt@rock-chips.com>

commit fe4407c0dc58215a7abfb7532740d79ddabe7a7a upstream.

We need different orderings when turning a core on and turning a core
off. In one case we need to assert reset before turning power off.
In ther other case we need to turn power on and the deassert reset.

In general, the correct flow is:

CPU off:
reset_control_assert
regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), BIT(pd))
wait_for_power_domain_to_turn_off
CPU on:
regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), 0)
wait_for_power_domain_to_turn_on
reset_control_deassert

This is needed for stressing CPU up/down, as per:
cd /sys/devices/system/cpu/
for i in $(seq 10000); do
echo "================= $i ============"
for j in $(seq 100); do
while [[ "$(cat cpu1/online)$(cat cpu2/online)$(cat cpu3/online)" != "000"" ]]
echo 0 > cpu1/online
echo 0 > cpu2/online
echo 0 > cpu3/online
done
while [[ "$(cat cpu1/online)$(cat cpu2/online)$(cat cpu3/online)" != "111" ]]; do
echo 1 > cpu1/online
echo 1 > cpu2/online
echo 1 > cpu3/online
done
done
done

The following is reproducable log:
[34466.186812] PM: noirq suspend of devices complete after 0.669 msecs
[34466.186824] Disabling non-boot CPUs ...
[34466.187509] CPU1: shutdown
[34466.188672] CPU2: shutdown
[34473.736627] Kernel panic - not syncing:Watchdog detected hard LOCKUP on cpu 0
.......
or others similar log:
.......
[ 4072.454453] CPU1: shutdown
[ 4072.504436] CPU2: shutdown
[ 4072.554426] CPU3: shutdown
[ 4072.577827] CPU1: Booted secondary processor
[ 4072.582611] CPU2: Booted secondary processor
<hang>

Tested by cpu up/down scripts, the results told us need delay more time
before write the sram. The wait time is affected by many aspects
(e.g: cpu frequency, bootrom frequency, sram frequency, bus speed, ...).

Although the cpus other than cpu0 will write the sram, the speedy is
no the same as cpu0, if the cpu0 early wake up, perhaps the other cpus
can't startup. As we know, the cpu0 can wake up when the cpu1/2/3 write
the 'sram+4/8' and send the sev.
Anyway.....
At the moment, 1ms delay will be happy work for cpu up/down scripts test.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Fixes: 3ee851e212d0 ("ARM: rockchip: add basic smp support for rk3288")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm/mach-rockchip/platsmp.c | 40 +++++++++++++++++++++------------------
1 file changed, 22 insertions(+), 18 deletions(-)

--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -72,29 +72,22 @@ static struct reset_control *rockchip_ge
static int pmu_set_power_domain(int pd, bool on)
{
u32 val = (on) ? 0 : BIT(pd);
+ struct reset_control *rstc = rockchip_get_core_reset(pd);
int ret;

+ if (IS_ERR(rstc) && read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
+ pr_err("%s: could not get reset control for core %d\n",
+ __func__, pd);
+ return PTR_ERR(rstc);
+ }
+
/*
* We need to soft reset the cpu when we turn off the cpu power domain,
* or else the active processors might be stalled when the individual
* processor is powered down.
*/
- if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
- struct reset_control *rstc = rockchip_get_core_reset(pd);
-
- if (IS_ERR(rstc)) {
- pr_err("%s: could not get reset control for core %d\n",
- __func__, pd);
- return PTR_ERR(rstc);
- }
-
- if (on)
- reset_control_deassert(rstc);
- else
- reset_control_assert(rstc);
-
- reset_control_put(rstc);
- }
+ if (!IS_ERR(rstc) && !on)
+ reset_control_assert(rstc);

ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
if (ret < 0) {
@@ -112,6 +105,12 @@ static int pmu_set_power_domain(int pd,
}
}

+ if (!IS_ERR(rstc)) {
+ if (on)
+ reset_control_deassert(rstc);
+ reset_control_put(rstc);
+ }
+
return 0;
}

@@ -146,9 +145,14 @@ static int rockchip_boot_secondary(unsig
* the mailbox:
* sram_base_addr + 4: 0xdeadbeaf
* sram_base_addr + 8: start address for pc
+ * The cpu0 need to wait the other cpus other than cpu0 entering
+ * the wfe state.The wait time is affected by many aspects.
+ * (e.g: cpu frequency, bootrom frequency, sram frequency, ...)
* */
- udelay(10);
- writel(virt_to_phys(secondary_startup), sram_base_addr + 8);
+ mdelay(1); /* ensure the cpus other than cpu0 to startup */
+
+ writel(virt_to_phys(rockchip_secondary_startup),
+ sram_base_addr + 8);
writel(0xDEADBEAF, sram_base_addr + 4);
dsb_sev();
}



\
 
 \ /
  Last update: 2015-09-19 20:01    [W:0.359 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site