lkml.org 
[lkml]   [2015]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.1 032/102] clk: pistachio: Fix override of clk-pll settings from boot loader
Date
4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zdenko Pulitika <zdenko.pulitika@imgtec.com>

commit e53f21c761d141bbcbce06e9ddab3b4e0a828f2c upstream.

PLL enable callbacks are overriding PLL mode (int/frac) and
Noise reduction (on/off) settings set by the boot loader which
results in the incorrect clock rate.

PLL mode and noise reduction are defined by the DSMPD and DACPD bits
of the PLL control register. PLL .enable() callbacks enable PLL
by deasserting all power-down bits of the PLL control register,
including DSMPD and DACPD bits, which is not necessary since
these bits don't actually enable/disable PLL.

This commit fixes the problem by removing DSMPD and DACPD bits
from the "PLL enable" mask.

Fixes: 43049b0c83f17("CLK: Pistachio: Add PLL driver")
Reviewed-by: Andrew Bresitcker <abrestic@chromium.org>
Signed-off-by: Zdenko Pulitika <zdenko.pulitika@imgtec.com>
Signed-off-by: Govindraj Raja <govindraj.raja@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/clk/pistachio/clk-pll.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/clk/pistachio/clk-pll.c
+++ b/drivers/clk/pistachio/clk-pll.c
@@ -115,8 +115,7 @@ static int pll_gf40lp_frac_enable(struct
u32 val;

val = pll_readl(pll, PLL_CTRL3);
- val &= ~(PLL_FRAC_CTRL3_PD | PLL_FRAC_CTRL3_DACPD |
- PLL_FRAC_CTRL3_DSMPD | PLL_FRAC_CTRL3_FOUTPOSTDIVPD |
+ val &= ~(PLL_FRAC_CTRL3_PD | PLL_FRAC_CTRL3_FOUTPOSTDIVPD |
PLL_FRAC_CTRL3_FOUT4PHASEPD | PLL_FRAC_CTRL3_FOUTVCOPD);
pll_writel(pll, val, PLL_CTRL3);

@@ -233,7 +232,7 @@ static int pll_gf40lp_laint_enable(struc
u32 val;

val = pll_readl(pll, PLL_CTRL1);
- val &= ~(PLL_INT_CTRL1_PD | PLL_INT_CTRL1_DSMPD |
+ val &= ~(PLL_INT_CTRL1_PD |
PLL_INT_CTRL1_FOUTPOSTDIVPD | PLL_INT_CTRL1_FOUTVCOPD);
pll_writel(pll, val, PLL_CTRL1);




\
 
 \ /
  Last update: 2015-09-19 20:01    [W:0.253 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site