lkml.org 
[lkml]   [2015]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/3] Support the timer on RK3368 SoC
Date
Timer0~11 count up from zero to a programmed value and
generate an interrupt when the count reaches the programmed value.

TIMER0, TIMER1, TIMER2, Timer3, TIMER4 and TIMER5 are in the CPU
subsystem, using timer ch0 ~ ch5 respectively. The timer clock is 24MHz
OSC.

This series are found on RK3368 SoC, verified on rk3368 evb board.


Changes in v1:
- As Russell, Thomas, Daniel comments, let's replace NO_IRQ by '!irq'.
- As the Heiko comments, add the "rockchip,rk3368-timer" for timer.
Although the 'rockchip,rk3288-timer' is working for RK3368, need to add the
'rockchip,rk3368-timer' for the rk3368-spec timer in the future.

Caesar Wang (3):
clocksource: rockchip: Make the driver more readability and compatible
arm64: Enable the timer on Rockchip architecture
arm64: dts: rockchip: Add the needed timer for RK3368 SoC

arch/arm64/Kconfig.platforms | 1 +
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 6 ++++++
drivers/clocksource/rockchip_timer.c | 29 +++++++++++++++--------------
3 files changed, 22 insertions(+), 14 deletions(-)

--
1.9.1



\
 
 \ /
  Last update: 2015-09-18 11:21    [W:0.059 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site