lkml.org 
[lkml]   [2015]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 0/4] PCI: arm64/powerpc: Fix parsing of linux,pci-probe-only
On Thu, Sep 17, 2015 at 12:17 PM, Marc Zyngier <marc.zyngier@arm.com> wrote:
> On 17/09/15 16:30, Bjorn Helgaas wrote:
>> On Fri, Sep 04, 2015 at 05:50:07PM +0100, Marc Zyngier wrote:
>>> The pci-host-generic driver parses the linux,pci-probe-only property,
>>> and assumes that it will have a boolean parameter.
>>>
>>> Turns out that the Seattle DTS file has a naked "linux,pci-probe-only"
>>> property, which leads to the driver dereferencing some unsuspecting
>>> memory location. Nothing really bad happens (we end up reading some
>>> other bit of DT, fortunately), but that not a reason to keep it this
>>> way. Turns out that the Pseries code (where this code was lifted from)
>>> may suffer from the same issue.
>>>
>>> The first patch introduces a common (and fixed) version of that check
>>> that can be used by drivers and architectures that require it. The two
>>> following patches change the pci-host-generic driver and the powerpc
>>> code to use it.
>>>
>>> Finally, the bad property is removed from the Seatle DTS, because it
>>> is simply not necessary (it actually prevents me from using SR-IOV,
>>> which otherwise runs fine without the probe-only thing).
>>>
>>> This has been tested on the offending Seattle board.
>>>
>>> * From v3:
>>> - Restrict the property lookup to /chosen (Rob)
>>> - Acked-by on patch #4 from Suravee
>>> - I swear this is the last time I rework these patches! ;-)
>>>
>>> * From v2:
>>> - Use of_property_read_u32 to safely read the property (Rob)
>>> - Add a log message to indicate when we enable probe-only
>>> (probably quite useful for debugging)
>>>
>>> * From v1:
>>> - Consolidate the parsing in of_pci.c (Bjorn)
>>>
>>> Marc Zyngier (4):
>>> of/pci: Add of_pci_check_probe_only to parse "linux,pci-probe-only"
>>> PCI: pci-host-generic: Fix lookup of linux,pci-probe-only property
>>> powerpc: PCI: Fix lookup of linux,pci-probe-only property
>>> arm64: dts: Drop linux,pci-probe-only from the Seattle DTS
>>>
>>> arch/arm64/boot/dts/amd/amd-overdrive.dts | 1 -
>>> arch/powerpc/platforms/pseries/setup.c | 14 ++------------
>>> drivers/of/of_pci.c | 28 ++++++++++++++++++++++++++++
>>> drivers/pci/host/pci-host-generic.c | 9 +--------
>>> include/linux/of_pci.h | 3 +++
>>> 5 files changed, 34 insertions(+), 21 deletions(-)
>>
>> Applied with the comment tweak and acks to pci/host-generic for v4.4,
>> thanks!
>
> Turns out that the 01.org infrastructure has picked up on a compilation
> bug with randconfig. The following patch seems to fix it and should be
> applied on the first patch:
>
> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
> index 485d625..2da5abc 100644
> --- a/drivers/of/of_pci.c
> +++ b/drivers/of/of_pci.c
> @@ -6,6 +6,8 @@
> #include <linux/of_pci.h>
> #include <linux/slab.h>
>
> +#include <asm-generic/pci-bridge.h>
> +
> static inline int __of_pci_pci_compare(struct device_node *node,
> unsigned int data)
> {
>
> Sorry for the annoyance.

Folded in and re-pushed, thanks!


\
 
 \ /
  Last update: 2015-09-17 19:41    [W:0.067 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site