Messages in this thread Patch in this message | | | From | Aravind Gopalakrishnan <> | Subject | [PATCH 2/3] EDAC, amd64_edac: Extend scrub rate programmability feature for F15hM60h | Date | Wed, 16 Sep 2015 15:53:30 -0500 |
| |
For F15h M60h processor, the scrub rate control register has moved to F2 of PCI config space and is at a different offset from earlier processors. The minimun recommended scrub rate is also different. (Refer D18F2x1c8_dct[1:0][DramScrub] on Fam15hM60h BKDG)
Modify the set_scrub_rate() and get_scrub_rate() functions so that they are aware of these changes.
Fixing couple of indentation issues since I am touching the file.
Tested on F15hM60h, Fam15h Models 00h-0fh and Fam10h systems and it works fine.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> --- drivers/edac/amd64_edac.c | 53 ++++++++++++++++++++++++++++++++++++++--------- drivers/edac/amd64_edac.h | 3 +++ 2 files changed, 46 insertions(+), 10 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 73aea40..1ec4a13 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -173,7 +173,7 @@ static inline int amd64_read_dct_pci_cfg(struct amd64_pvt *pvt, u8 dct, * scan the scrub rate mapping table for a close or matching bandwidth value to * issue. If requested is too big, then use last maximum value found. */ -static int __set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate) +static u32 find_scrub_rate(u32 new_bw, u32 min_rate, u32 *scrub_bw) { u32 scrubval; int i; @@ -200,28 +200,52 @@ static int __set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate) } scrubval = scrubrates[i].scrubval; + *scrub_bw = scrubval ? scrubrates[i].bandwidth : 0; - pci_write_bits32(ctl, SCRCTRL, scrubval, 0x001F); + return scrubval; +} - if (scrubval) - return scrubrates[i].bandwidth; +static inline void __set_scrub_rate(struct pci_dev *ctl, int offset, + u32 scrubval) +{ + pci_write_bits32(ctl, offset, scrubval, SCRMASK); - return 0; } static int set_scrub_rate(struct mem_ctl_info *mci, u32 bw) { struct amd64_pvt *pvt = mci->pvt_info; u32 min_scrubrate = 0x5; + u32 scrubrate, scrub_bw; if (pvt->fam == 0xf) min_scrubrate = 0x0; + else if (pvt->fam == 0x15 && pvt->model == 0x60) + min_scrubrate = 0x6; /* Erratum #505 */ if (pvt->fam == 0x15 && pvt->model < 0x10) f15h_select_dct(pvt, 0); - return __set_scrub_rate(pvt->F3, bw, min_scrubrate); + scrubrate = find_scrub_rate(bw, min_scrubrate, &scrub_bw); + + /* Scrub rate control register moved to F2 register space for + * F15hM60h andit is per DCT now. So, need to select the DCT + * using DCT_CFG_SEL first and then program the scrubrate + */ + if (pvt->fam == 0x15 && pvt->model == 0x60) { + f15h_select_dct(pvt, 0); + __set_scrub_rate(pvt->F2, F15H_M60H_SCRCTRL, scrubrate); + f15h_select_dct(pvt, 1); + __set_scrub_rate(pvt->F2, F15H_M60H_SCRCTRL, scrubrate); + + goto scrub_out; + } + + __set_scrub_rate(pvt->F3, SCRCTRL, scrubrate); + +scrub_out: + return scrub_bw; } static int get_scrub_rate(struct mem_ctl_info *mci) @@ -234,9 +258,18 @@ static int get_scrub_rate(struct mem_ctl_info *mci) if (pvt->fam == 0x15 && pvt->model < 0x10) f15h_select_dct(pvt, 0); - amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval); + if (pvt->fam == 0x15 && pvt->model == 0x60) { + /* Since we mirror the same scrubrate value across + * both DCTs, it is enough to read the value off one of + * the DCT registers. + */ + f15h_select_dct(pvt, 0); + amd64_read_pci_cfg(pvt->F2, F15H_M60H_SCRCTRL, &scrubval); + } else { + amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval); + } - scrubval = scrubval & 0x001F; + scrubval = scrubval & SCRMASK; for (i = 0; i < ARRAY_SIZE(scrubrates); i++) { if (scrubrates[i].scrubval == scrubval) { @@ -1316,7 +1349,7 @@ static int f15_m60h_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, * F16h and F15h model 30h have only limited cs_modes. */ static int f16_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, - unsigned cs_mode, int cs_mask_nr) + unsigned cs_mode, int cs_mask_nr) { WARN_ON(cs_mode > 12); @@ -1666,7 +1699,7 @@ static int f1x_match_to_this_node(struct amd64_pvt *pvt, unsigned range, } static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range, - u64 sys_addr, int *chan_sel) + u64 sys_addr, int *chan_sel) { int cs_found = -EINVAL; int num_dcts_intlv = 0; diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index 4bdec75..15c0eb4 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -255,6 +255,8 @@ #define DCT_SEL_HI 0x114 +#define F15H_M60H_SCRCTRL 0x1C8 + /* * Function 3 - Misc Control */ @@ -269,6 +271,7 @@ #define NBSL_PP_OBS 0x2 #define SCRCTRL 0x58 +#define SCRMASK 0x1F #define F10_ONLINE_SPARE 0xB0 #define online_spare_swap_done(pvt, c) (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1) -- 2.5.0
| |