lkml.org 
[lkml]   [2015]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/3] thermal: Add Mediatek thermal controller support
Hi Sascha,

On Mon, Aug 31, 2015 at 3:34 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> This adds support for the Mediatek thermal controller found on MT8173
> and likely other SoCs.
> The controller is a bit special. It does not have its own ADC, instead
> it controls the on-SoC AUXADC via AHB bus accesses. For this reason
> we need the physical address of the AUXADC. Also it controls a mux
> using AHB bus accesses, so we need the APMIXEDSYS physical address aswell.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>

[snip...]

> +static int mtk_read_temp(void *data, long *temp)
> +{
> + struct mtk_thermal_bank *bank = data;
> +
> + mtk_thermal_get_bank(bank);
> +
> + *temp = mtk_thermal_bank_temperature(bank);
> +
> + mtk_thermal_put_bank(bank);
> +
> + return 0;
> +}
> +
> +static const struct thermal_zone_of_device_ops mtk_thermal_ops = {
> + .get_temp = mtk_read_temp,

On v4.3-rc1, this now causes a compile warning, since the prototype
for get_temp was changed to:

int (*get_temp)(void *, int *);

by:
commit 17e8351a77397e8a83727eb17e3a3e9b8ab5257a
thermal: consistently use int for temperatures

-Dan


\
 
 \ /
  Last update: 2015-09-14 09:41    [W:2.044 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site