Messages in this thread | ![/](/images/icornerl.gif) | | Date | Fri, 11 Sep 2015 19:02:21 +0100 | From | Lee Jones <> | Subject | Re: [PATCH 03/11] ARM: DT: STiH407: Add SPI 3 wire and 4 wire pinctrl configs |
| |
On Fri, 11 Sep 2015, Peter Griffin wrote:
> This patch adds the spi pinctrl configurations for all SPI > controllers, and also the alternate muxings which > can be used depending on board design. > > Signed-off-by: Christophe Kerello <christophe.kerello@st.com> > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > arch/arm/boot/dts/stih407-pinctrl.dtsi | 239 ++++++++++++++++++++++++++++++++- > 1 file changed, 235 insertions(+), 4 deletions(-)
Acked-by: Lee Jones <lee.jones@linaro.org>
> diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi > index ce219a1..bb3b0c7 100644 > --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi > +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi > @@ -262,6 +262,57 @@ > }; > }; > }; > + > + spi10 { > + pinctrl_spi10_default: spi10-4w-alt1-0 { > + st,pins { > + mtsr = <&pio4 6 ALT1 OUT>; > + mrst = <&pio4 7 ALT1 IN>; > + scl = <&pio4 5 ALT1 OUT>; > + }; > + }; > + > + pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 { > + st,pins { > + mtsr = <&pio4 6 ALT1 BIDIR_PU>; > + scl = <&pio4 5 ALT1 OUT>; > + }; > + }; > + }; > + > + spi11 { > + pinctrl_spi11_default: spi11-4w-alt2-0 { > + st,pins { > + mtsr = <&pio3 1 ALT2 OUT>; > + mrst = <&pio3 0 ALT2 IN>; > + scl = <&pio3 2 ALT2 OUT>; > + }; > + }; > + > + pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 { > + st,pins { > + mtsr = <&pio3 1 ALT2 BIDIR_PU>; > + scl = <&pio3 2 ALT2 OUT>; > + }; > + }; > + }; > + > + spi12 { > + pinctrl_spi12_default: spi12-4w-alt2-0 { > + st,pins { > + mtsr = <&pio3 6 ALT2 OUT>; > + mrst = <&pio3 4 ALT2 IN>; > + scl = <&pio3 7 ALT2 OUT>; > + }; > + }; > + > + pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 { > + st,pins { > + mtsr = <&pio3 6 ALT2 BIDIR_PU>; > + scl = <&pio3 7 ALT2 OUT>; > + }; > + }; > + }; > }; > > pin-controller-front0 { > @@ -451,11 +502,159 @@ > }; > > spi0 { > - pinctrl_spi0_default: spi0-default { > + pinctrl_spi0_default: spi0-4w-alt2-0 { > + st,pins { > + mtsr = <&pio10 6 ALT2 OUT>; > + mrst = <&pio10 7 ALT2 IN>; > + scl = <&pio10 5 ALT2 OUT>; > + }; > + }; > + > + pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 { > st,pins { > - mtsr = <&pio12 6 ALT2 BIDIR>; > - mrst = <&pio12 7 ALT2 BIDIR>; > - scl = <&pio12 5 ALT2 BIDIR>; > + mtsr = <&pio10 6 ALT2 BIDIR_PU>; > + scl = <&pio10 5 ALT2 OUT>; > + }; > + }; > + > + pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 { > + st,pins { > + mtsr = <&pio19 7 ALT1 OUT>; > + mrst = <&pio19 5 ALT1 IN>; > + scl = <&pio19 6 ALT1 OUT>; > + }; > + }; > + > + pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 { > + st,pins { > + mtsr = <&pio19 7 ALT1 BIDIR_PU>; > + scl = <&pio19 6 ALT1 OUT>; > + }; > + }; > + }; > + > + spi1 { > + pinctrl_spi1_default: spi1-4w-alt2-0 { > + st,pins { > + mtsr = <&pio11 1 ALT2 OUT>; > + mrst = <&pio11 2 ALT2 IN>; > + scl = <&pio11 0 ALT2 OUT>; > + }; > + }; > + > + pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 { > + st,pins { > + mtsr = <&pio11 1 ALT2 BIDIR_PU>; > + scl = <&pio11 0 ALT2 OUT>; > + }; > + }; > + > + pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 { > + st,pins { > + mtsr = <&pio14 3 ALT1 OUT>; > + mrst = <&pio14 4 ALT1 IN>; > + scl = <&pio14 2 ALT1 OUT>; > + }; > + }; > + > + pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 { > + st,pins { > + mtsr = <&pio14 3 ALT1 BIDIR_PU>; > + scl = <&pio14 2 ALT1 OUT>; > + }; > + }; > + }; > + > + spi2 { > + pinctrl_spi2_default: spi2-4w-alt2-0 { > + st,pins { > + mtsr = <&pio12 6 ALT2 OUT>; > + mrst = <&pio12 7 ALT2 IN>; > + scl = <&pio12 5 ALT2 OUT>; > + }; > + }; > + > + pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 { > + st,pins { > + mtsr = <&pio12 6 ALT2 BIDIR_PU>; > + scl = <&pio12 5 ALT2 OUT>; > + }; > + }; > + > + pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 { > + st,pins { > + mtsr = <&pio14 6 ALT1 OUT>; > + mrst = <&pio14 7 ALT1 IN>; > + scl = <&pio14 5 ALT1 OUT>; > + }; > + }; > + > + pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 { > + st,pins { > + mtsr = <&pio14 6 ALT1 BIDIR_PU>; > + scl = <&pio14 5 ALT1 OUT>; > + }; > + }; > + > + pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 { > + st,pins { > + mtsr = <&pio15 6 ALT2 OUT>; > + mrst = <&pio15 7 ALT2 IN>; > + scl = <&pio15 5 ALT2 OUT>; > + }; > + }; > + > + pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 { > + st,pins { > + mtsr = <&pio15 6 ALT2 BIDIR_PU>; > + scl = <&pio15 5 ALT2 OUT>; > + }; > + }; > + }; > + > + spi3 { > + pinctrl_spi3_default: spi3-4w-alt3-0 { > + st,pins { > + mtsr = <&pio13 6 ALT3 OUT>; > + mrst = <&pio13 7 ALT3 IN>; > + scl = <&pio13 5 ALT3 OUT>; > + }; > + }; > + > + pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 { > + st,pins { > + mtsr = <&pio13 6 ALT3 BIDIR_PU>; > + scl = <&pio13 5 ALT3 OUT>; > + }; > + }; > + > + pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 { > + st,pins { > + mtsr = <&pio17 7 ALT1 OUT>; > + mrst = <&pio17 5 ALT1 IN>; > + scl = <&pio17 6 ALT1 OUT>; > + }; > + }; > + > + pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 { > + st,pins { > + mtsr = <&pio17 7 ALT1 BIDIR_PU>; > + scl = <&pio17 6 ALT1 OUT>; > + }; > + }; > + > + pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 { > + st,pins { > + mtsr = <&pio18 6 ALT1 OUT>; > + mrst = <&pio18 7 ALT1 IN>; > + scl = <&pio18 5 ALT1 OUT>; > + }; > + }; > + > + pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 { > + st,pins { > + mtsr = <&pio18 6 ALT1 BIDIR_PU>; > + scl = <&pio18 5 ALT1 OUT>; > }; > }; > }; > @@ -578,6 +777,38 @@ > }; > }; > }; > + > + spi4 { > + pinctrl_spi4_default: spi4-4w-alt1-0 { > + st,pins { > + mtsr = <&pio30 1 ALT1 OUT>; > + mrst = <&pio30 2 ALT1 IN>; > + scl = <&pio30 0 ALT1 OUT>; > + }; > + }; > + > + pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 { > + st,pins { > + mtsr = <&pio30 1 ALT1 BIDIR_PU>; > + scl = <&pio30 0 ALT1 OUT>; > + }; > + }; > + > + pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 { > + st,pins { > + mtsr = <&pio34 1 ALT3 OUT>; > + mrst = <&pio34 2 ALT3 IN>; > + scl = <&pio34 0 ALT3 OUT>; > + }; > + }; > + > + pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 { > + st,pins { > + mtsr = <&pio34 1 ALT3 BIDIR_PU>; > + scl = <&pio34 0 ALT3 OUT>; > + }; > + }; > + }; > }; > > pin-controller-flash {
-- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
| ![\](/images/icornerr.gif) |