lkml.org 
[lkml]   [2015]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 02/16] PM / OPP: Add 'opp-microvolt-triplets' binding
Date
If 'opp-microvolt' is used to specify values for multiple regulators,
then we need this additional information to know if the values passed
should be treated as <target> or <target min max>.

This is because, DT doesn't differentiate between these two styles:

prop = <x>, <y>, <z>;
prop = <x y z>;

Cc: devicetree@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
Documentation/devicetree/bindings/opp/opp.txt | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 8759bc4783ed..719603b87353 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -76,6 +76,16 @@ This describes the OPPs belonging to a device. This node can have following
present here is important, as that should match the order in which values are
present in 'opp-microvolt' and 'opp-microamp' properties.

+- opp-microvolt-triplets: This is a required property, only if multiple supplies
+ are available for the device. Otherwise it is ignored.
+
+ 'opp-microvolt' can be present in two forms: <target> or <target min max>, per
+ power-supply. 'opp-microvolt-triplets' property is used to find the form in
+ which 'opp-microvolt' is present.
+
+ If present, then 'opp-microvolt' must be present in <target min max> form,
+ else in <target> form.
+
- OPP nodes: One or more OPP nodes describing voltage-current-frequency
combinations. Their name isn't significant but their phandle can be used to
reference an OPP.
@@ -403,6 +413,8 @@ Example 4: Handling multiple regulators

/* OR */

+ opp-microvolt-triplets;
+
opp00 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
@@ -416,6 +428,8 @@ Example 4: Handling multiple regulators

/* OR */

+ opp-microvolt-triplets;
+
opp00 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
--
2.4.0


\
 
 \ /
  Last update: 2015-09-11 14:21    [W:0.043 / U:2.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site