lkml.org 
[lkml]   [2015]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/6] ARM: DT: STi: STiH407: Add c8sectpfe LinuxDVB DT node.
On Fri, 28 Aug 2015, Peter Griffin wrote:

> This patch adds in the required DT node for the c8sectpfe
> Linux DVB demux driver which allows the tsin channels
> to be used on an upstream kernel.
>
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> ---
> arch/arm/boot/dts/stihxxx-b2120.dtsi | 35 +++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 62994ae..f9fca10 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -6,6 +6,9 @@
> * it under the terms of the GNU General Public License version 2 as
> * published by the Free Software Foundation.
> */
> +
> +#include <dt-bindings/clock/stih407-clks.h>
> +#include <dt-bindings/media/c8sectpfe.h>
> / {
> soc {
> sbc_serial0: serial@9530000 {
> @@ -85,5 +88,37 @@
> status = "okay";
> };
>
> + demux@08a20000 {
> + compatible = "st,stih407-c8sectpfe";
> + status = "okay";
> + reg = <0x08a20000 0x10000>,
> + <0x08a00000 0x4000>;
> + reg-names = "c8sectpfe", "c8sectpfe-ram";
> + interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>,
> + <GIC_SPI 35 IRQ_TYPE_NONE>;
> + interrupt-names = "c8sectpfe-error-irq",
> + "c8sectpfe-idle-irq";
> + pinctrl-0 = <&pinctrl_tsin0_serial>;
> + pinctrl-1 = <&pinctrl_tsin0_parallel>;
> + pinctrl-2 = <&pinctrl_tsin3_serial>;
> + pinctrl-3 = <&pinctrl_tsin4_serial_alt3>;
> + pinctrl-4 = <&pinctrl_tsin5_serial_alt1>;
> + pinctrl-names = "tsin0-serial",
> + "tsin0-parallel",
> + "tsin3-serial",
> + "tsin4-serial",
> + "tsin5-serial";
> + clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
> + clock-names = "c8sectpfe";
> +
> + /* tsin0 is TSA on NIMA */
> + tsin0: port@0 {
> + tsin-num = <0>;
> + serial-not-parallel;
> + i2c-bus = <&ssc2>;
> + rst-gpio = <&pio15 4 GPIO_ACTIVE_HIGH>;
> + dvb-card = <STV0367_TDA18212_NIMA_1>;
> + };
> + };
> };
> };

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-09-01 10:21    [W:0.122 / U:1.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site