lkml.org 
[lkml]   [2015]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 4/6] [media] c8sectpfe: Update binding to reset-gpio
Date
reset-gpio is more clear than rst-gpio.

This change has been done as one atomic commit but it
does breaks compatability with older dtbs.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt | 6 +++---
arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++--
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 2 +-
3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
index d4def76..84ae9d1 100644
--- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
+++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
@@ -35,7 +35,7 @@ Required properties (tsin (child) node):

- tsin-num : tsin id of the InputBlock (must be between 0 to 6)
- i2c-bus : phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected.
-- rst-gpio : reset gpio for this tsin channel.
+- reset-gpio : reset gpio for this tsin channel.

Optional properties (tsin (child) node):

@@ -75,7 +75,7 @@ Example:
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
- rst-gpio = <&pio15 4 0>;
+ reset-gpio = <&pio15 4 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMA_1>;
};

@@ -83,7 +83,7 @@ Example:
tsin-num = <3>;
serial-not-parallel;
i2c-bus = <&ssc3>;
- rst-gpio = <&pio15 7 0>;
+ reset-gpio = <&pio15 7 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMB_1>;
};
};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index f9fca10..b940934 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -6,8 +6,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <dt-bindings/clock/stih407-clks.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/c8sectpfe.h>
/ {
soc {
@@ -116,7 +116,7 @@
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
- rst-gpio = <&pio15 4 GPIO_ACTIVE_HIGH>;
+ reset-gpio = <&pio15 4 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMA_1>;
};
};
diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
index 3a91093..e19c6b4 100644
--- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
@@ -822,7 +822,7 @@ static int c8sectpfe_probe(struct platform_device *pdev)
}
of_node_put(i2c_bus);

- tsin->rst_gpio = of_get_named_gpio(child, "rst-gpio", 0);
+ tsin->rst_gpio = of_get_named_gpio(child, "reset-gpio", 0);

ret = gpio_is_valid(tsin->rst_gpio);
if (!ret) {
--
1.9.1


\
 
 \ /
  Last update: 2015-09-01 13:01    [W:0.075 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site