lkml.org 
[lkml]   [2015]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] irqchip/gic: Fix EOImode setting for non-DT/ACPI systems
Date
Non-DT/ACPI systems call directly into the GIC driver at init time.
Turns out 0b996fd35957 ("irqchip/GIC: Convert to EOImode == 1")
breaks old non firmware-driven platforms, as the driver only
works out the capability of the platform on the DT/ACPI paths.

Fix this thinko by forcing EOImode==0 on non-DT platforms,
which are not capable of supporting a hypervisor anyway.

Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
drivers/irqchip/irq-gic.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 72bf81b..e6b7ed5 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -993,7 +993,7 @@ static const struct irq_domain_ops gic_irq_domain_ops = {
.xlate = gic_irq_domain_xlate,
};

-void __init gic_init_bases(unsigned int gic_nr, int irq_start,
+static void __init __gic_init_bases(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base,
u32 percpu_offset, struct device_node *node)
{
@@ -1103,6 +1103,19 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
gic_pm_init(gic);
}

+void __init gic_init_bases(unsigned int gic_nr, int irq_start,
+ void __iomem *dist_base, void __iomem *cpu_base,
+ u32 percpu_offset, struct device_node *node)
+{
+ /*
+ * Non-DT/ACPI systems won't run a hypervisor, so let's not
+ * bother with these...
+ */
+ static_key_slow_dec(&supports_deactivate);
+ __gic_init_bases(gic_nr, irq_start, dist_base, cpu_base,
+ percpu_offset, node);
+}
+
#ifdef CONFIG_OF
static int gic_cnt __initdata;

@@ -1137,7 +1150,7 @@ gic_of_init(struct device_node *node, struct device_node *parent)
if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
percpu_offset = 0;

- gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node);
+ __gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node);
if (!gic_cnt)
gic_init_physaddr(node);

@@ -1265,7 +1278,7 @@ gic_v2_acpi_init(struct acpi_table_header *table)
* as default IRQ domain to allow for GSI registration and GSI to IRQ
* number translation (see acpi_register_gsi() and acpi_gsi_to_irq()).
*/
- gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
+ __gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
irq_set_default_host(gic_data[0].domain);

acpi_irq_model = ACPI_IRQ_MODEL_GIC;
--
2.1.4


\
 
 \ /
  Last update: 2015-09-01 11:41    [W:0.031 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site