lkml.org 
[lkml]   [2015]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 1/6] mtd: nand: gpmi: add gpmi dsm supend/resume support
On Fri, 28 Aug 2015, Han Xu wrote:

> From: Huang Shijie <b32955@freescale.com>
>
> i.MX6SX supports deep sleep mode(DSM) that may turn off GPMI/BCH power
> during suspend, add gpmi nand suspend/resume function to release DMA
> channel in suspend function and re-init GPMI/BCH controller during
> resume function.
>

Just a question regarding gpmi_pm_resume() errror reporting
Is there a reason that the retrun value of gpmi_extra_init() is not checked ?
gpmi_extra_init() can retrun -ENOMEM or -EINVAL via return enable_edo_mode(),
while the -EINVAL would produce a dev_err message, -ENOMEM does not so maybe
this also wants to include a if(ret) {...} ? - something like the below

> Although it is not necessary to restore GPMI/BCH registers value for
> i.MX6QDL, the code doesn't distinguish different platforms to keep the
> code simple.
>
> Signed-off-by: Huang Shijie <b32955@freescale.com>
> Signed-off-by: Han Xu <han.xu@freescale.com>
> ---
> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 45 +++++++++++++++++++++++++++++++++-
> 1 file changed, 44 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 1b8f350..dfd0ba1 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -1,7 +1,7 @@
> /*
> * Freescale GPMI NAND Flash Driver
> *
> - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
> + * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
> * Copyright (C) 2008 Embedded Alley Solutions, Inc.
> *
> * This program is free software; you can redistribute it and/or modify
> @@ -2036,9 +2036,52 @@ static int gpmi_nand_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static int gpmi_pm_suspend(struct device *dev)
> +{
> + struct gpmi_nand_data *this = dev_get_drvdata(dev);
> +
> + release_dma_channels(this);
> + return 0;
> +}
> +
> +static int gpmi_pm_resume(struct device *dev)
> +{
> + struct gpmi_nand_data *this = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = acquire_dma_channels(this);
> + if (ret < 0)
> + return ret;
> +
> + /* re-init the GPMI registers */
> + this->flags &= ~GPMI_TIMING_INIT_OK;
> + ret = gpmi_init(this);
> + if (ret) {
> + dev_err(this->dev, "Error setting GPMI : %d\n", ret);
> + return ret;
> + }
> +
> + /* re-init the BCH registers */
> + ret = bch_set_geometry(this);
> + if (ret) {
> + dev_err(this->dev, "Error setting BCH : %d\n", ret);
> + return ret;
> + }
> +
> + /* re-init others */
> + gpmi_extra_init(this);

report failure of enable_edo_mode() ?

if (ret) {
dev_err(this->dev, "Error enabling EDO mode : %d\n", ret);
return ret;
}

> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops gpmi_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume)
> +};
> +
> static struct platform_driver gpmi_nand_driver = {
> .driver = {
> .name = "gpmi-nand",
> + .pm = &gpmi_pm_ops,
> .of_match_table = gpmi_nand_id_table,
> },
> .probe = gpmi_nand_probe,
> --
> 1.9.1
>


\
 
 \ /
  Last update: 2015-08-29 11:41    [W:0.098 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site