lkml.org 
[lkml]   [2015]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] watchdog: bcm7038: add device tree binding documentation
On Sun, Aug 23, 2015 at 08:32:21PM -0700, Guenter Roeck wrote:
> Hi Justin,
>
> On 08/20/2015 10:41 AM, Justin Chen wrote:
> >Add device tree binding docmentation for the watchdog hardware block
> >on bcm7038 and newer SoCs.
> >
> >Signed-off-by: Justin Chen <justinpopo6@gmail.com>
> >---
> > .../devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
> >
> >diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
> >new file mode 100644
> >index 0000000..adb8260
> >--- /dev/null
> >+++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
> >@@ -0,0 +1,19 @@
> >+BCM7038 Watchdog timer
> >+
> >+Required properties:
> >+
> >+- compatible : should be "brcm,bcm7038-wdt"
> >+- reg : Specifies base physical address and size of the registers.
> >+
> >+Optional properties:
> >+
> >+- clocks: the clock running the watchdog
> >+- clock-frequency: the rate of the clock
>
> Is 'clock-frequency' really needed (and useful), or would it make more sense
> to expect the user to configure a fixed clock if nothing else is available ?
> How do other drivers handle this ?
>
> Thanks,
> Guenter
>
> >+
> >+Example:
> >+
> >+watchdog {
> >+ compatible = "brcm,bcm7038-wdt";
> >+ clocks = <&upg_fixed>;
> >+ reg = <0xf040a7e8 0x16>;
> >+};
> >
>

Hello Guenter,

> Is 'clock-frequency' really needed (and useful), or would it make more sense
> to expect the user to configure a fixed clock if nothing else is available ?
> How do other drivers handle this ?

The reason for 'clock-frequency' was for a case where our device tree did not
have clocks. Creating a new fixed clock for a single device seems unnecessary
compared to a 'clock-frequency' property. Their is a use for 'clock-frequency',
but it is not really necessary. However, this is my first linux patch, so I do
not fully trust my judgement on this...

Looking at other drivers, none of them have both clock and clock-frequency.

Thank you for your time on reviewing the patch Guenter. Much appreciated!

Thanks,
Justin Chen


\
 
 \ /
  Last update: 2015-08-25 20:21    [W:1.308 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site