lkml.org 
[lkml]   [2015]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 3/3] media: atmel-isi: add sanity check for supported formats in try/set_fmt()
From
Date
Hi, Laurent

On 8/22/2015 2:22 AM, Laurent Pinchart wrote:
> Hi Josh,
>
> Thank you for the patch.
>
> On Friday 21 August 2015 16:08:14 Josh Wu wrote:
>> After adding the format check in try_fmt()/set_fmt(), we don't need any
>> format check in configure_geometry(). So make configure_geometry() as
>> void type.
>>
>> Signed-off-by: Josh Wu <josh.wu@atmel.com>
>> ---
>>
>> Changes in v3:
>> - check the whether format is supported, if no then return a default
>> format.
>> - misc changes according to Laurent's feedback.
>>
>> Changes in v2:
>> - new added patch
>>
>> drivers/media/platform/soc_camera/atmel-isi.c | 37 ++++++++++++++++++------
>> 1 file changed, 29 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c
>> b/drivers/media/platform/soc_camera/atmel-isi.c index fe9247a..84c91d3
>> 100644
>> --- a/drivers/media/platform/soc_camera/atmel-isi.c
>> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
>> @@ -102,17 +102,19 @@ static u32 isi_readl(struct atmel_isi *isi, u32 reg)
>> return readl(isi->regs + reg);
>> }
>>
>> -static int configure_geometry(struct atmel_isi *isi, u32 width,
>> +static void configure_geometry(struct atmel_isi *isi, u32 width,
>> u32 height, u32 code)
>> {
>> u32 cfg2;
>>
>> /* According to sensor's output format to set cfg2 */
>> switch (code) {
>> - /* YUV, including grey */
>> + default:
>> + /* Grey */
>> case MEDIA_BUS_FMT_Y8_1X8:
>> cfg2 = ISI_CFG2_GRAYSCALE;
>> break;
>> + /* YUV */
>> case MEDIA_BUS_FMT_VYUY8_2X8:
>> cfg2 = ISI_CFG2_YCC_SWAP_MODE_3;
>> break;
>> @@ -126,8 +128,6 @@ static int configure_geometry(struct atmel_isi *isi, u32
>> width, cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT;
>> break;
>> /* RGB, TODO */
>> - default:
>> - return -EINVAL;
>> }
>>
>> isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
>> @@ -138,8 +138,23 @@ static int configure_geometry(struct atmel_isi *isi,
>> u32 width, cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
>> & ISI_CFG2_IM_VSIZE_MASK;
>> isi_writel(isi, ISI_CFG2, cfg2);
>> +}
>>
>> - return 0;
>> +static bool is_supported(struct soc_camera_device *icd,
>> + const u32 pixformat)
>> +{
>> + switch (pixformat) {
>> + /* YUV, including grey */
>> + case V4L2_PIX_FMT_GREY:
>> + case V4L2_PIX_FMT_YUYV:
>> + case V4L2_PIX_FMT_UYVY:
>> + case V4L2_PIX_FMT_YVYU:
>> + case V4L2_PIX_FMT_VYUY:
>> + return true;
>> + /* RGB, TODO */
>> + default:
>> + return false;
>> + }
>> }
>>
>> static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi)
>> @@ -390,10 +405,8 @@ static int start_streaming(struct vb2_queue *vq,
>> unsigned int count) /* Disable all interrupts */
>> isi_writel(isi, ISI_INTDIS, (u32)~0UL);
>>
>> - ret = configure_geometry(isi, icd->user_width, icd->user_height,
>> + configure_geometry(isi, icd->user_width, icd->user_height,
>> icd->current_fmt->code);
>> - if (ret < 0)
>> - return ret;
>>
>> spin_lock_irq(&isi->lock);
>> /* Clear any pending interrupt */
>> @@ -491,6 +504,10 @@ static int isi_camera_set_fmt(struct soc_camera_device
>> *icd, struct v4l2_mbus_framefmt *mf = &format.format;
>> int ret;
>>
>> + /* check with atmel-isi support format, if not support use UYVY */
>> + if (!is_supported(icd, pix->pixelformat))
>> + pix->pixelformat = V4L2_PIX_FMT_YUYV;
> The comment mentions UYVY and the code uses YUYV.

Oops, forgotten to change the comments. I'll fix it.
>
>> +
>> xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
>> if (!xlate) {
>> dev_warn(icd->parent, "Format %x not found\n",
> Can this still happen ?

I think this warning should not happen if user call set_fmt() with the
format that get from by get_formats().
But it is a common pattern in soc_camera host code to handle this error.

>
>> @@ -540,6 +557,10 @@ static int isi_camera_try_fmt(struct soc_camera_device
>> *icd, u32 pixfmt = pix->pixelformat;
>> int ret;
>>
>> + /* check with atmel-isi support format, if not support use UYVY */
>> + if (!is_supported(icd, pix->pixelformat))
>> + pix->pixelformat = V4L2_PIX_FMT_YUYV;
>> +
>> xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
>> if (pixfmt && !xlate) {
>> dev_warn(icd->parent, "Format %x not found\n", pixfmt);
> Same comment here.
>
> I wonder whether most of the content of isi_camera_set_fmt() and
> isi_camera_try_fmt() could be factorized out into a shared function.

I agree. the current set_fmt() doesn't touch any hardware, so it's
almost same as try_fmt().

Best Regards,
Josh Wu
>



\
 
 \ /
  Last update: 2015-08-24 12:41    [W:0.132 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site