lkml.org 
[lkml]   [2015]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller
Date
add a DT binding documentation of xHCI host controller for the
MT8173 SoC from Mediatek.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
.../devicetree/bindings/usb/mt8173-xhci.txt | 52 ++++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt

diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
new file mode 100644
index 0000000..8e6e463
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
@@ -0,0 +1,52 @@
+mt65XX xHCI
+
+The device node for Mediatek SOC usb3.0 host controller
+
+Required properties:
+ - compatible : should contain "mediatek,mt8173-xhci"
+ - reg : specifies physical base address and size of the registers,
+ the first one for MAC, the second for IPPC
+ - interrupts : interrupt used by the controller
+ - power-domains : a phandle to USB power domain node to control usb's
+ mtcmos
+ - vusb33-supply : regulator of usb avdd3.3v
+
+ - clocks : a list of phandle + clock-specifier pairs, one for each
+ entry in clock-names
+ - clock-names : must contain
+ "sys_ck": for clock of xHCI MAC
+ "wakeup_deb_p0": for usb wakeup debounce clock of port0
+ "wakeup_deb_p0": for usb wakeup debounce clock of port1
+
+ - phys : a list of phandle + phy specifier pairs
+ - usb3-lpm-capable : supports USB3 LPM
+ - mediatek,syscon-wakeup : phandle to syscon used to access usb wakeup
+ control register
+ - mediatek,wakeup-src : 1: ip sleep wakeup mode; 2: line state wakeup
+ mode; others means don't enable wakeup source of usb
+
+Optional properties:
+ - vbus-supply : Reference to the VBUS regulator;
+
+Example:
+usb30: usb@11270000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x11270000 0 0x4000>,
+ <0 0x11280000 0 0x0800>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>,
+ <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB1>;
+ clock-names = "sys_ck",
+ "wakeup_deb_p0",
+ "wakeup_deb_p1";
+ phys = <&phy_port0 PHY_TYPE_USB3>,
+ <&phy_port1 PHY_TYPE_USB2>;
+ vusb33-supply = <&mt6397_vusb_reg>;
+ vbus-supply = <&usb_p1_vbus>;
+ usb3-lpm-capable;
+ mediatek,syscon-wakeup = <&pericfg>;
+ mediatek,wakeup-src = <1>;
+ status = "okay";
+};
--
1.8.1.1.dirty


\
 
 \ /
  Last update: 2015-08-22 04:01    [W:2.511 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site