lkml.org 
[lkml]   [2015]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 1/2] Documentation: dt: Add Xilinx zynqmp dma device tree binding documentation
From
Hi all,

sorry for HTML mail spam last night ... couple of nits below

On Wed, Aug 5, 2015 at 8:19 PM, Punnaiah Choudary Kalluri
<punnaiah.choudary.kalluri@xilinx.com> wrote:
> Device-tree binding documentation for Xilinx zynqmp dma engine used in
> Zynq UltraScale+ MPSoC.
>
> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
> ---
> Changes in v4:
> - None
> Changes in v3:
> - None
> Changes in v2:
> - None
> ---
> .../devicetree/bindings/dma/xilinx/zynqmp_dma.txt | 61 ++++++++++++++++++++
> 1 files changed, 61 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
> new file mode 100644
> index 0000000..e4f92b9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
> @@ -0,0 +1,61 @@
> +Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
> +memory to device and device to memory transfers. It also has flow
> +control and rate control support for slave/peripheral dma access.

How about: The Xilinx ZynqMP DMA engine does support memory to memory transfers,
memory to device and device to memory transfers. It also has flow
control and rate control
support for slave / peripheral DMA access.
> +
> +Required properties:
> +- compatible: Should be "xlnx,zynqmp-dma-1.0"
> +- #dma-cells: Should be <1>, a single cell holding a line request number
> +- reg: Memory map for module access
> +- interrupt-parent: Interrupt controller the interrupt is routed through
> +- interrupts: Should contain DMA channel interrupt
> +- xlnx,bus-width: AXI buswidth in bits. Should contain 128 or 64
> +
> +Optional properties:
> +- xlnx,include-sg: Indicates the controller to operate in simple or scatter
> + gather dma mode
s/dma/DMA
> +- xlnx,ratectrl: Scheduling interval in terms of clock cycles for
> + source AXI transaction
> +- xlnx,overfetch: Tells whether the channel is allowed to over fetch the data
(Maybe) s/Tells/Determines/
> +- xlnx,src-issue: Number of AXI outstanding transactions on source side
> +- xlnx,desc-axi-cohrnt: Tells whether the AXI transactions generated for the
> + descriptor read are marked Non-coherent
(Maybe) s/Tells/Determines/
> +- xlnx,src-axi-cohrnt: Tells whether the AXI transactions generated for the
> + source descriptor payload are marked Non-coherent
same
> +- xlnx,dst-axi-cohrnt: Tells whether the AXI transactions generated for the
> + dst descriptor payload are marked Non-coherent
> +- xlnx,desc-axi-qos: AXI QOS bits to be used for descriptor fetch
> +- xlnx,src-axi-qos: AXI QOS bits to be used for data read
> +- xlnx,dst-axi-qos: AXI QOS bits to be used for data write
> +- xlnx,desc-axi-cache: AXI cache bits to be used for descriptor fetch.
> +- xlnx,desc-axi-cache: AXI cache bits to be used for data read
> +- xlnx,desc-axi-cache: AXI cache bits to be used for data write
> +- xlnx,src-burst-len: AXI length for data read. Support only power of 2 values
> + i.e 1,2,4,8 and 16
> +- xlnx,dst-burst-len: AXI length for data write. Support only power of 2 values
> + i.e 1,2,4,8 and 16
> +
> +Example:
> +++++++++
> +fpd_dma_chan1: dma@FD500000 {
> + compatible = "xlnx,zynqmp-dma-1.0";
> + reg = <0x0 0xFD500000 0x1000>;
> + #dma_cells = <1>;
#dma-cells = <1>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 117 4>;
> + xlnx,bus-width = <128>;
> + xlnx,include-sg;
> + xlnx,overfetch;
> + xlnx,ratectrl = <0>;
> + xlnx,src-issue = <16>;
> + xlnx,desc-axi-cohrnt;
> + xlnx,src-axi-cohrnt;
> + xlnx,dst-axi-cohrnt;
> + xlnx,desc-axi-qos = <0>;
> + xlnx,desc-axi-cache = <0>;
> + xlnx,src-axi-qos = <0>;
> + xlnx,src-axi-cache = <2>;
> + xlnx,dst-axi-qos = <0>;
> + xlnx,dst-axi-cache = <2>;
> + xlnx,src-burst-len = <4>;
> + xlnx,dst-burst-len = <4>;
> +};
> --
> 1.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Cheers,

Moritz


\
 
 \ /
  Last update: 2015-08-21 19:01    [W:0.143 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site