lkml.org 
[lkml]   [2015]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/6] ethernet/s2io: advertise what hw supports in vlan_features
Date
For some reason, the s2io driver has never filled in vlan_features. If
that's fully intentional, then this patch should be dropped. If its not,
then this patch is necessary to maintain some functionality of slave s2io
devices in a bonding group.

Without this, the presence of a s2io device in a bond will not trigger
LRO support to be enabled at the bond level, even while it is enabled on
the slave itself.

This change becomes necessary when NETIF_F_LRO is added to
netdev_features.h's NETIF_F_ONE_FOR_ALL.

CC: Jon Mason <jdmason@kudzu.us>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
drivers/net/ethernet/neterion/s2io.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 2d1b942..8bbf540 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -7922,6 +7922,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
NETIF_F_RXCSUM | NETIF_F_LRO;
dev->features |= dev->hw_features |
NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
+ dev->vlan_features |= dev->hw_features;
if (sp->device_type & XFRAME_II_DEVICE) {
dev->hw_features |= NETIF_F_UFO;
if (ufo)
--
1.8.3.1


\
 
 \ /
  Last update: 2015-08-13 20:21    [W:0.113 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site