Messages in this thread | | | Date | Sun, 05 Jul 2015 12:48:43 +0100 | From | Jonathan Cameron <> | Subject | Re: [PATCH 5/9] iio: mma8452: add devicetree documentation |
| |
On 04/07/15 14:55, Martin Kepplinger wrote: > Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> > Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> This is trivial enough I'll take it without a device tree ack (after a few days) but convention is to CC all device tree patches to the maintainers of devicetree bindings as well as the devicetree list.
Jonathan > --- > .../devicetree/bindings/iio/accel/mma8452.txt | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/mma8452.txt > > diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt > new file mode 100644 > index 0000000..8d98e05 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt > @@ -0,0 +1,21 @@ > +Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer > + > +Required properties: > + > + - compatible: should be "fsl,mma8653", "fsl,mma8652", "fsl,mma8453" or > + "fsl,mma8452" respectively. > + - reg: the I2C address of the chip > + > +Optional properties: > + > + - interrupt-parent: should be the phandle for the interrupt controller > + - interrupts: interrupt mapping for GPIO IRQ > + > +Example: > + > + mma8653fc@1d { > + compatible = "fsl,mma8653"; > + reg = <0x1d>; > + interrupt-parent = <&gpio1>; > + interrupts = <5 0>; > + }; >
| |