lkml.org 
[lkml]   [2015]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] thermal: remove dangling 'weight_attr' device file
On 23-07-15, 14:32, Viresh Kumar wrote:
> This file isn't getting removed while we unbind a device from thermal
> zone. And this causes following messages when the device is registered
> again:
>
> WARNING: CPU: 0 PID: 2228 at /home/viresh/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x60/0x70()
> sysfs: cannot create duplicate filename '/devices/virtual/thermal/thermal_zone0/cdev0_weight'
> Modules linked in: cpufreq_dt(+) [last unloaded: cpufreq_dt]
> CPU: 0 PID: 2228 Comm: insmod Not tainted 4.2.0-rc3-00059-g44fffd9473eb #272
> Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
> [<c00153e8>] (unwind_backtrace) from [<c0012368>] (show_stack+0x10/0x14)
> [<c0012368>] (show_stack) from [<c053a684>] (dump_stack+0x84/0xc4)
> [<c053a684>] (dump_stack) from [<c002284c>] (warn_slowpath_common+0x80/0xb0)
> [<c002284c>] (warn_slowpath_common) from [<c00228ac>] (warn_slowpath_fmt+0x30/0x40)
> [<c00228ac>] (warn_slowpath_fmt) from [<c012d524>] (sysfs_warn_dup+0x60/0x70)
> [<c012d524>] (sysfs_warn_dup) from [<c012d244>] (sysfs_add_file_mode_ns+0x13c/0x190)
> [<c012d244>] (sysfs_add_file_mode_ns) from [<c012d2d4>] (sysfs_create_file_ns+0x3c/0x48)
> [<c012d2d4>] (sysfs_create_file_ns) from [<c03c04a8>] (thermal_zone_bind_cooling_device+0x260/0x358)
> [<c03c04a8>] (thermal_zone_bind_cooling_device) from [<c03c2e70>] (of_thermal_bind+0x88/0xb4)
> [<c03c2e70>] (of_thermal_bind) from [<c03c10d0>] (__thermal_cooling_device_register+0x17c/0x2e0)
> [<c03c10d0>] (__thermal_cooling_device_register) from [<c03c3f50>] (__cpufreq_cooling_register+0x3a0/0x51c)
> [<c03c3f50>] (__cpufreq_cooling_register) from [<bf00505c>] (cpufreq_ready+0x44/0x88 [cpufreq_dt])
> [<bf00505c>] (cpufreq_ready [cpufreq_dt]) from [<c03d6c30>] (cpufreq_add_dev+0x4a0/0x7dc)
> [<c03d6c30>] (cpufreq_add_dev) from [<c02cd3ec>] (subsys_interface_register+0x94/0xd8)
> [<c02cd3ec>] (subsys_interface_register) from [<c03d785c>] (cpufreq_register_driver+0x10c/0x1f0)
> [<c03d785c>] (cpufreq_register_driver) from [<bf0057d4>] (dt_cpufreq_probe+0x60/0x8c [cpufreq_dt])
> [<bf0057d4>] (dt_cpufreq_probe [cpufreq_dt]) from [<c02d03e4>] (platform_drv_probe+0x44/0xa4)
> [<c02d03e4>] (platform_drv_probe) from [<c02cead8>] (driver_probe_device+0x174/0x2b4)
> [<c02cead8>] (driver_probe_device) from [<c02ceca4>] (__driver_attach+0x8c/0x90)
> [<c02ceca4>] (__driver_attach) from [<c02cd078>] (bus_for_each_dev+0x68/0x9c)
> [<c02cd078>] (bus_for_each_dev) from [<c02ce2f0>] (bus_add_driver+0x19c/0x214)
> [<c02ce2f0>] (bus_add_driver) from [<c02cf490>] (driver_register+0x78/0xf8)
> [<c02cf490>] (driver_register) from [<c0009710>] (do_one_initcall+0x8c/0x1d4)
> [<c0009710>] (do_one_initcall) from [<c05396b0>] (do_init_module+0x5c/0x1b8)
> [<c05396b0>] (do_init_module) from [<c0086490>] (load_module+0xd34/0xed8)
> [<c0086490>] (load_module) from [<c0086704>] (SyS_init_module+0xd0/0x120)
> [<c0086704>] (SyS_init_module) from [<c000f480>] (ret_fast_syscall+0x0/0x3c)
> ---[ end trace 3be0e7b7dc6e3c4f ]---
>
> Fixes: db91651311c8 ("thermal: export weight to sysfs")
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> drivers/thermal/thermal_core.c | 1 +
> 1 file changed, 1 insertion(+)

Hi Eduardo,

Not sure if you are on leaves right now, but this is an rc fix. Can
you please apply that ?

--
viresh


\
 
 \ /
  Last update: 2015-07-30 18:21    [W:0.069 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site