lkml.org 
[lkml]   [2015]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/20] ARM: at91/dt: sama5d3: use slow clock where necessary
Date
The watchdog, the reset controller, the RTC and the shutdown controller
need the slow clock, add it where necessary.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
arch/arm/boot/dts/sama5d3.dtsi | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 9e2444b07bce..6e2cfef98ff2 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1261,11 +1261,13 @@
rstc@fffffe00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
+ clocks = <&clk32k>;
};

shutdown-controller@fffffe10 {
compatible = "atmel,at91sam9x5-shdwc";
reg = <0xfffffe10 0x10>;
+ clocks = <&clk32k>;
};

pit: timer@fffffe30 {
@@ -1279,6 +1281,7 @@
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
@@ -1315,6 +1318,7 @@
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffeb0 0x30>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
};
};

--
2.1.4


\
 
 \ /
  Last update: 2015-07-30 07:21    [W:0.161 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site