lkml.org 
[lkml]   [2015]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[RFC PATCH 2/2] gpu: ipu-v3: use clock and de polarity from videomode
This patch depends on "drm: add support for for clk and de polarity".
Since "drm: add support for for clk and de polarity", clock and data
polarity set in devicetree are passed correctly through drm_display_mode
to videomode flags used by ipuv3.
Removes custom configuration flags for clock and de polarities and use
polarity flags from given videomode.
Keeps compatibility to current settings and device tree descriptions,
by setting data enable polarity to high, if not explicitly set to low by
flags.

display-timings resulting polarity of pixel clock
past now
pixelclk-active unset 0 0
pixelclk-active = 0 0 0
pixelclk-active = 1 0 1 <--- corrected

display-timings resulting polarity of data enable
past now
de-active unset 1 1
de-active = 0 1 0 <--- corrected
de-active = 1 1 1

Tested on Freescale i.MX53(parallel) and i.MX6(LVDS).

Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
---
drivers/gpu/drm/imx/ipuv3-crtc.c | 2 --
drivers/gpu/ipu-v3/ipu-di.c | 4 ++--
include/video/imx-ipu-v3.h | 2 --
3 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c
index 7bc8301..6813271 100644
--- a/drivers/gpu/drm/imx/ipuv3-crtc.c
+++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
@@ -172,8 +172,6 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc,
else
sig_cfg.clkflags = 0;

- sig_cfg.enable_pol = 1;
- sig_cfg.clk_pol = 0;
sig_cfg.bus_format = ipu_crtc->bus_format;
sig_cfg.v_to_h_sync = 0;
sig_cfg.hsync_pin = ipu_crtc->di_hsync_pin;
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c
index 2970c6b..0b1a7d2 100644
--- a/drivers/gpu/ipu-v3/ipu-di.c
+++ b/drivers/gpu/ipu-v3/ipu-di.c
@@ -621,7 +621,7 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
}
}

- if (sig->clk_pol)
+ if (sig->mode.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
di_gen |= DI_GEN_POLARITY_DISP_CLK;

ipu_di_write(di, di_gen, DI_GENERAL);
@@ -632,7 +632,7 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
reg = ipu_di_read(di, DI_POL);
reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);

- if (sig->enable_pol)
+ if (!(sig->mode.flags & DISPLAY_FLAGS_DE_LOW))
reg |= DI_POL_DRDY_POLARITY_15;
if (sig->data_pol)
reg |= DI_POL_DRDY_DATA_POLARITY;
diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h
index 85dedca..4178fa2 100644
--- a/include/video/imx-ipu-v3.h
+++ b/include/video/imx-ipu-v3.h
@@ -34,8 +34,6 @@ enum ipuv3_type {
*/
struct ipu_di_signal_cfg {
unsigned data_pol:1; /* true = inverted */
- unsigned clk_pol:1; /* true = rising edge */
- unsigned enable_pol:1;

struct videomode mode;

--
2.1.4






\
 
 \ /
  Last update: 2015-07-15 18:01    [W:1.875 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site