lkml.org 
[lkml]   [2015]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/6] MIPS: net: BPF: Move register definition to the BPF header
Date
The registers will be used by a subsequent patch introducing
ASM helpers so move them to a common header.

Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
---
arch/mips/net/bpf_jit.c | 35 -----------------------------------
arch/mips/net/bpf_jit.h | 35 +++++++++++++++++++++++++++++++++++
2 files changed, 35 insertions(+), 35 deletions(-)

diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
index 84cd09ba230a..954df295f945 100644
--- a/arch/mips/net/bpf_jit.c
+++ b/arch/mips/net/bpf_jit.c
@@ -63,41 +63,6 @@

#define ptr typeof(unsigned long)

-/* ABI specific return values */
-#ifdef CONFIG_32BIT /* O32 */
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define r_err MIPS_R_V1
-#define r_val MIPS_R_V0
-#else /* CONFIG_CPU_LITTLE_ENDIAN */
-#define r_err MIPS_R_V0
-#define r_val MIPS_R_V1
-#endif
-#else /* N64 */
-#define r_err MIPS_R_V0
-#define r_val MIPS_R_V0
-#endif
-
-#define r_ret MIPS_R_V0
-
-/*
- * Use 2 scratch registers to avoid pipeline interlocks.
- * There is no overhead during epilogue and prologue since
- * any of the $s0-$s6 registers will only be preserved if
- * they are going to actually be used.
- */
-#define r_off MIPS_R_S2
-#define r_A MIPS_R_S3
-#define r_X MIPS_R_S4
-#define r_skb MIPS_R_S5
-#define r_M MIPS_R_S6
-#define r_s0 MIPS_R_T4 /* scratch reg 1 */
-#define r_s1 MIPS_R_T5 /* scratch reg 2 */
-#define r_tmp_imm MIPS_R_T6 /* No need to preserve this */
-#define r_tmp MIPS_R_T7 /* No need to preserve this */
-#define r_zero MIPS_R_ZERO
-#define r_sp MIPS_R_SP
-#define r_ra MIPS_R_RA
-
#define SCRATCH_OFF(k) (4 * (k))

/* JIT flags */
diff --git a/arch/mips/net/bpf_jit.h b/arch/mips/net/bpf_jit.h
index f9b5a4d3dbf4..3afa7a6d81b3 100644
--- a/arch/mips/net/bpf_jit.h
+++ b/arch/mips/net/bpf_jit.h
@@ -43,4 +43,39 @@
#define MIPS_COND_X (0x1 << 5)
#define MIPS_COND_K (0x1 << 6)

+/* ABI specific return values */
+#ifdef CONFIG_32BIT /* O32 */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define r_err MIPS_R_V1
+#define r_val MIPS_R_V0
+#else /* CONFIG_CPU_LITTLE_ENDIAN */
+#define r_err MIPS_R_V0
+#define r_val MIPS_R_V1
+#endif
+#else /* N64 */
+#define r_err MIPS_R_V0
+#define r_val MIPS_R_V0
+#endif
+
+#define r_ret MIPS_R_V0
+
+/*
+ * Use 2 scratch registers to avoid pipeline interlocks.
+ * There is no overhead during epilogue and prologue since
+ * any of the $s0-$s6 registers will only be preserved if
+ * they are going to actually be used.
+ */
+#define r_off MIPS_R_S2
+#define r_A MIPS_R_S3
+#define r_X MIPS_R_S4
+#define r_skb MIPS_R_S5
+#define r_M MIPS_R_S6
+#define r_s0 MIPS_R_T4 /* scratch reg 1 */
+#define r_s1 MIPS_R_T5 /* scratch reg 2 */
+#define r_tmp_imm MIPS_R_T6 /* No need to preserve this */
+#define r_tmp MIPS_R_T7 /* No need to preserve this */
+#define r_zero MIPS_R_ZERO
+#define r_sp MIPS_R_SP
+#define r_ra MIPS_R_RA
+
#endif /* BPF_JIT_MIPS_OP_H */
--
2.4.2


\
 
 \ /
  Last update: 2015-06-04 13:01    [W:0.098 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site